willmon22

Ok what are the prices of those specified sizes. I only see sizes.

Ok, throw me the numbers and I can calculate it for you.

So how many wicks can you get out of these and what would the average price per wick be?

Well that would be hard for me to get as I am in the US. And I don't want to pay extra to get something shipped from the uk to here.

It would be cool if they could somehow make it to where the bottom is deattachable like in the picture. If they could then they could sell the atomizer replacements for much cheaper once you got a cartomizer.

Well the sheets I seen were only long enough to make 2 wicks and have a small amount left from each wick made that you can't do anything with. I looked at a site and found the sizes are 2 x 1 1/8 inches doesn't seem like much.

I am definately going to get some of them. They look like the ones to get. I don't like clearomizers that much as they are difficult to use but I like the idea of this cartomizer. Only question is will they have a dual coil version and will it be able to go up to 6 volts to get a warm vape. Never mind I found one: http://www.madvapes.com/tank-replacement-dual-coil-cartomizers-1-5-ohms-dual-hole.html I guess I should pay attention and go to purchase on the page that is on the thread to see there is a dual coil option. I wonder how well they will do on 6 volts.

www.litecigusa.net/Genesis_Stainless_Steel_Mesh_Wick_p/genesis-atomizer-wick.htm I happen to run into this and I think it is better this way. As you don't have to roll it or oxidize it as it has already been done for you. Also I believe it is even cheaper as it is only 95 cents a wick instead of 3.95 from what I seen elsewhere for 2 pieces.

I just want things that are prebuilt. As I just am not the best at soldering and probably won't have the stuff to be able to solder properly anyways.

That is a little too advanced for me. I never took any electric courses in school just computer technology didn't have much use for it though as I knew most of it aside from the networking.

I beleive you mean 3.6. But if you really meant 36 then that would be a heck of a lot of batteries or a good upstep transformer in it. I was thinking this one is better as it is suppose to have japan stuff in it and some american thing that doesn't make it hot like this china thing does. I forget what they are I would have to look.

I was thinking of getting a new mod as my current battery that can't be replaced just keeps giving off less and less time when I press and hold the button even when fully charged. So I looked around and found these: http://www.mister-e-liquid.com/the-beast-box-vv-now-available/ http://www.mister-e-liquid.com/the-detonator-vv-variable-voltage-mod-v2/ Both can go up to 8.4 volts and they have 4 protections on them and they use 2 3000MaH batteries. So I would assume it would work great and for a long time as well. Has anyone else used someting that goes up to 8.4 volts and went as high as that?

It is here: http://www.litecigusa.net/Genesis_Style_Rebuildable_Atomizer_p/genesis-rebuild-atomizer.htm The thing I found about it is that it comes with a wick and coil preinstalled as well as 2 extra wicks and 3' of 32awg NiChrome. I haven't searched much so I don't know if any other sites offer them like this with one preinstalled in the device as well as 2 extra wicks.

http://www.litecigusa.net/Smoktech_R_Tank_Rebuildable_Atomizer_p/smoke-rtank.htm Seems like smok tech has made a rebuildable atomizer now. I don't look around too often so I don't know how long this has been around.

I actually think they are the first to make their own. At least their own brand doesn't necessarily mean they are overseeing the product and having it made under people they put in charge. Blu cigs is just bought by a cigarette company but they did not make that brand themselves like swisher sweets did I believe.

Well it kind of didn't make since to me as with the 100% VG it seemed to be wicking fine but yet I was still getting a straight burnt taste. Then I switched to this unknown pg vg mix and I could taste it fine with no burning.

I am beginning to think that it wasn't working properly at first because of this 100% VG juice I had. I have this Engilsh Toffy that is 26mg but it doesn't say what vg pg mix it is. Even when the device seems to not be lighting up all coils evenly I still have a good toffy taste with no burning. But the 100% VG always tasted burnt. But at the moment it would seem that it is giving a good hit and taste just very little vapor with this toffy. I guess I am going to have to keep at it and hope for the best. Odd thing is that all the coils lit up fine before I added juice now none of them are lighting up but is still giving off vapor. What exactly is it that I am doing wrong now? Do I have to many coils? I have about 4 of them now I think I will go back down to 3 as it was going perfectly that way. I may just get some more kanthal as I have no idea what kind of kanthal I got with this kit. http://www.free-cigs.com/Kanthal-A-Resistance-Wire-3-Feet_p_155.html this seems like some good cheap kanthal about a dollar and some odd cents for 3 feet. I don't think that is too bad at all considering lots of coils can be made from it and regular fully built cartomizers are atomizers are over 3 dollars a piece.

Well I guess what I mean is it possible to put 2 seperate coils on it. Like use one screw that is the juice hole and the other one and wrap the coil and have both coils work? I haven't tried it but I think it could be possible. But then again the coil would be going a long way to the other screw and might just short out.

The lighting in my room isn't too great. And my android phone just isn't good enough to use the light I do have in the room. Is it possible to make 2 coils on the wick? Or is there not enough room on the wick to handle 2 coils? I think 2 coils may work a little better. And what I have for a better is this: http://www.free-cigs.com/Ego-Pass-through-VV-Black_p_130.html It worked great when I first got it, just it is a little lacking lately I think it is because the cartomizer I have is probably going out I guess. I can't barely get 100 puffs from it when it is at 6 volts. I am using a Smoktech DCT and it is 2.5ohms I think. I usually use 1.5 dual coils but they were out of stock on it now they are out of stock on all except the ego ones on ecblend.

I got the juice directly on the wick the coils still light up evenly. It sputtered a little but I guess it was because I put too much on it. Once I get more liquid I will know for sure if I have got it up and going right. I actually tried out by dripping on the coil and it seems to have a great taste now with no burning either. It is no longer catching fire either even when I jack it up to 6 volts it didn't even pop the coil either when it stayed on as long as it does.

I think I got it now. I think all it was was just that the wick was touching the bottom. I wrapped it around 3 times and it is all lighting up nice and even now. I am going to try some of this older liquid I have and see if it goes anywhere. But here is a new picture: Only problem is that this coil is probably really low resistance. Maybe .7 or something it is an inch long or less. I will be getting better photos eventually this webcam isn't the greatest. My phone is a little better. This is the best I will be able to do for a picture until I can get better lighting in my room. It may not look even in this picture but it is just like the above picture.

Thank you uma. That was very informative. I will be getting more juice at some point and try this out. As I am certain that the atomizer will work great once I learn how to get it up and going. I was wanting to get one at one point but a since one seems to cost up to 20 even when they are on sale. This one was given to me by vapinmamma and I am very grateful It will be great once I learn how to get it up and going. I think I may just be over-thinking it and making it harder than it really is. And as for the ohm meter I only have a multimeter that can read ohms but I am really thinking it isn't working right. At the moment I think the atomizer is shorting out because I push the wick all the way to the bottom and it is touching the bottom I am sure. So I guess if I lift it up a little off the bottom then it may not short out as badly and make the wick catch fire sometimes.

I think I am just going to stick to these regular tanks. I just can't seem to get the coils lined up properly. I did it once but it seemed like it was still tasting burnt to me. If one of you out there that uses these wants it I will send it to you. But only if you know how to use it or have used one before. I don't want them to end up getting frustrated like I have with it. The steps seemed simple enough and I have followed them all. It just seems that I am not good enough to use one of these and probably never will be. I was just wanting to use one as it would make things even more cheap as 6 would get at least 4-5 atomizers instead of just 2 like it would for the tanks I use.

Well I have talked to scott. Or igetcha69. It was as I would have thought it is shorting out and I need to get the coils lined up better. And yes I understand what you mean about more of a advanced user. But tell me this if you don't have any other steps to get to be more advanced then what step are you suppose to take? I don't mean to sound bad but basically everyone at one point never had any experience with lots of the things they do today. And how are you suppose to get experience with it if you don't try it at some point. And for the ohms and the correct amount to vape at I am going by length of the coil. Since it is 2 inches I would assume it is 1.4Ohms minimum so I shouldn't go over 3.7 volts also I do what I was told anyway. Just start low until I find what voltage is best. But anyways if I can't get it to go properly then I will just send it to one of you that has experience with these as I don't want to have a device if I won't be able to get it set up properly.

I think my wick may be too short or maybe my coils weren't close enough together. Or perhaps I haven't let the coils get hot enough just yet to get them ready. But I have found even on a regular ego that the wick has caught fire still: If someone that knows alot about these atomizers happens to see this thread and knows what I am doing wrong it would greatly be appreciated. I am getting close to making it work properly but I am getting a slight burnt taste still and it has plenty of liquid getting wicked.