willmon22

I believe this all depends on the amount of nicotine in the liquid. As that is the main thing that would need to be calculated for the amount of packs. So just figure out how much nicotine is in a cigarette or a pack then calculate how much nicotine per ml and you should get a fairly accurate formula.

I don't think it is frayed o rings. I just got this tank but a few weeks ago a month maximum. My other one is even older and it has never done this. It is just that the paint or metal has broken down around the top and bottom on the inside. I believe that is from letting it sit in water for who knows how long when I had no e liquid and forgot to take it out to dry. I really think that the juice somehow has pulp or something in it or is just acting like it. I know for sure it can't have pulp in it as there is just flavors in ejuices and not the actual lemonade. But as the cleaning kit goes I am just not sure which I should get. The one I posted or this one: http://www.myfreedomsmokes.com/categories/the-plunger.html this one is about $10 more. But it has an attachment to screw into instead of just having a tube that goes around the cartomizer.

Well I can't clean things too well. All I do is let it soak in hot tap water and blow it out. If I could hook it up to a syringe kit and flush it several times then it would actually get everything out instead of little to nothing. I may get vodka eventually and use it as well once I get the kit. As I hear you can use it right after you flush it with vodka and it doesn't need any drying. Also with this you can get it filled without losing any juice maybe one drop or less but that is less than the condom method I believe.

It is a 6ml smok tech tank Also it is seeming to burn a little as in temperature but it doesn't seem hot. Also it doesn't taste like burning cardboard the flavor is fine. I guess my cartomizer is going out even though this is the second time I filled it. I think I am going to just get one of these I have been putting it off like getting a triple coil like I finally got. I believe it is worth it to a certain extent as it actually gives me a kick for 12 MG samples which I haven't had the last time I have used them with a dual coil.

I have the lemonade flavor from mister e liquid and it would seem as if it is getting condensation on the inside of the tank. It is as if the juice has pulp in it or something. I can make it go away when I shake it in all ways but it comes right back later. This is the first time I have encountered this but not the first time I have had a lemon flavored juice. I believe that I had a tank when I had lemon ice and it didn't do this. So is it suppose to do this or not?

Well these new cartos I have have 3 holes in them. They are prepunched so I am thinking it can't be flooding because of that. I am using a new liquid now and it isn't flooding. But the flavor is just really outstanding. I just can't quite figure out the flavors in it it is a Mystere

Yeah sounds like some stuff I might of looked over. I always thought I had my wick too close at the top but I guess I might have not had it close enough.

It hasn't even been a full week and now the color of the liquid in my tank is a reddish brown color. It seems that it has gotten really strong now too. It has extra flavor in it and it is 32MGs. I have used 32MGs before but it has been awhile I have just been using 24 lately and found it wasn't quite what I was looking for.

This one as well as this one I thought about getting one eventually as I only have a 6 volt one. It actually seems to be going out too it ends up cutting out before I am done drawing from it.

I just got it today and found that the shipping only cost like $1.60 or something. So I guess if you are going to order something from them make sure you get at least $2.99 worth as that is what they will charge you even if it will really cost cheaper for just sending one item.

VV or VW that is Variable Voltage and Wattage. Anyways I know this is off topic but what is the big deal with the vision spinners? I don't get it they provide a maximum of 5 volts. Whereas others can go all they way to 8. I ways say better to have something that can go higher than what you need than to have something that doesn't go higher than what you need and need it later.

Well that is what I thought it was. I was thinking it might be burnt juice but it is only coming out to be a very slight brown. But it does still taste a little strong. I guess I shouldn't have asked for extra flavor. Mister-E-Liquid has always been good about making juice and I never had any issues. Just I thought the flavor would be weak since it was the zebra gum flavor.

Mine has the flange on the bottom. I just put my tank in a dark place for several hours and for some odd reason I had brown liquid coming out the holes in the cartomizer. Is this suppose to happen? I shook it up for a little bit and it was gone then it came out another hole. Eventually I got it to stop coming out by shaking it up for a little while but it turned my liquid a little bit of a light brown color. The liquid I am using is: Technicolor The juice was clear when I got it in the mail with about 3 days transit time when it was made. But it didn't turn this color until I set it in a dark place and found brown coming out of 2 of 3 of the holes that is in the cartomizer.

So are these even easier to fill? Like all you have to do is just fill the tank and it will automatically absorb the liquid into the wicks? Or do you have to fill the cartomizer itself too? I am kind of getting a little nuts over the polyfilled ones as I always fill them too much and get them leaking out the bottom resulting in little to no vapor production.

Well I haven't got a watt mod yet. I only have a VV one no VW one yet. I do hope to get one eventually but I don't think I will. Spending 30 something on this one I have now is enough for me. I will only spend that amount for juices if I ever get that amount anymore. I already spent 30 for some juices to restock as I had none and needed some. I will have a triple coil cartomizer in the mail soon. I am hoping it will perform will I got it from that totally wicked eliquid site couldn't find a better place to get it in the us. I plan on getting the wick cartomizers for my tank next that have the big holes in it. I can only assume it will be really easy to fill and should be no leaks so easily like the polyfill ones I always overfill them and get them to leak out the bottom.

I blew some of the liquid out of it and it is performing a little better just isn't giving off as much vapor as I remember. The last time I blew the liquid out of it every bit of it eventually came out of the tank.

Well I have my: DCT and it seems that I am getting little to no vapor production. I have had this happen quite often when I get a new cartomizer for it and fill it for the first time. Am I doing something wrong? I even let it sit to absorb the eliquid for over half an hour and it still is doing this. Eventually it goes away but it hasn't this time. So what can I do to fix this and prevent it from happening again?

Haven't ordered anything from Mister-E-Liquid in awhile so I decided to stock up from them. 1 x Mister E's Lemonade (Nicotine Strength: 32mg (Extra High), Size: 36ml ($15.00), % VG: 33% VG MEL Custom Blend) 1 x Myster-E Ice (Nicotine Strength: 32mg (Extra High), Size: 6ml ($3.75), % VG: 33% VG MEL Custom Blend) 2 x 1.5 ohm Dual Coil Tank Cartomizer 3 Hole (Amount: Single ($2.25)) 1 x Technicolor (Nicotine Strength: 32mg (Extra High), Size: 6ml ($3.75), % VG: 33% VG MEL Custom Blend) Also I ordered a triple coil cartomizer from totally wicked. The total was $6.18 I think it is a little much but I guess for a triple coil it is good enough. I will find out soon enough when I receive it though.

I am going to have to work on that more. As I still can't get it loose enough to have it move around easier. And I did take a flame to the kanthal wire to make it easier to work with.

It was the top one. And it just refused to stop glowing orange. I will work on it further when I get a chance to get some more liquid.

Not sure. I get the coil to light up evenly before I get liquid on it. After I fill it with liquid it stops lighting up evenly.

No, never got the chance. I am unemployed and work won't pick back up until spring or summer. No one else is hiring at the moment.

Looks like I am going to have to look more into this then. I have a genesis clone but I still haven't gotten it to work perfectly yet. I am out of juice at the moment. The only juice I do have left I am afraid to use as I think it is expired and it tastes funny. So what is the difference between all the wire he is selling? Can't you just buy the cheapest one as it can withstand about the same as the link that you gave me. I guess it is the amount of ohms per foot.

It would be less than 5 cents a wick I believe. Now is there somewhere that charges just as cheap for coils?

They only have one ecigar that has a actual swisher sweet taste. The other two are just ecigs. Here is an article: http://www.cspnet.com/content/marketplace/swisher-introduces-new-e-swisher-electronic-cigarettecigar-product-line