willmon22

This is the problem. I just looked at them and found one does not have any notch on the bottom at all. Without this how is there suppose to be airflow? They should send me a replacement in this case correct? As I had no awareness of this until I was changing flavors and getting my tank refilled as I only have a single tank to use for these cartomizers.

Sounds about right. Not sure how this would end up occurring Both of them were ordered from the same supplier and they were both in the package and not ordered separately. I emailed them but didn't get a response from them either.

For me I just grab both wicks and squeeze the water out of them. After that I just put them back together and I am ready to use them again. But I just started using one yesterday so I wouldn't be sure this would work perfectly or not.

It is from http://www.free-cigs.com I have been talking to them and I was told to try to bend the post into place. I am not quite certain how I would do this. The device itself works fine just it kind of makes it difficult to put my needle in there to fill it up. I just put the 2.8 ohm head on it and it is going up to almost 4.8 with no burning issues. It isn't as so much as it is a little difficult to fill. I would have just expected it to be straight and not crooked like it is. Here is a picture of the device on the site: http://www.free-cigs.com/Ego-CE5-Replaceable-Head-Clearomizer-_p_109.html it looks fine there just it would appear. I think I will just have to deal with it. I really don't want to have to make them have to go through any further trouble to have to send another one.

It would seem that these are easier to flood than regular cartomizers. I filled it up a little bit past the 1.6ml mark and it ended up absorbing it above that and almost went higher than the cover to the atomizer. I was just not getting any vapor and didn't know what was wrong and then realized that and sucked some of the juice out and it seemed to of cleared the issue up. But the post the head screws onto I found seems to not be crooked. As I took it out and held it and turned it slowly and seen it isn't crooked. So what exactly is the problem is it the tube? Can it somehow be formed improperly? As when I look at it It would seem one side is almost straight up and down and the other side is possibly a little wider and more pyramidy.

Ok, well I thought this was suppose to have a flavor it is called dragons tear I believe.

I got some as a sample and it would seem that it is pointless to me. As there is no throat hit at all and it would seem as there is little to no flavor to it at all. Only point I can see is to get to be completely off nicotine and just keep going for the physiological effect of smoking when you aren't. I even just now put it all the way up to 6v thinking it would possibly give a small throat hit and maybe increase the flavor a little. But all it did was just produce clouds of vapor and surprisingly no burning either on a 2.8 ohm head in a rebuild-able CE5 clearomizer.

I was changing the cartomizer and filled it up and put it together and then I got no draw. It was as if I was sucking on a malt so thick you just flatten the straw. Anyways I thought it was badly flooded so I blew out the end into the eliquid container and it ended up blowing out every bit of the eliquid in the tank into the container. So then I removed the tank and just put on the cartomizer and it was working fine. Just as a note when it was drained completely still on the tank it still wouldn't draw. What exactly could cause this? As it would seem the cartomizer is fine without the tank but with it will not draw at all.

Well I sent them a message they said that the issue is typical and easily addressed. But it isn't the head that is improperly alligned. It is the the thing that screws into the bottom and the atomizer head screws into at the top. It is touching the side of the plastic tube and I ended up getting a scratch on the tube trying to get the head to get straight. But it isn't going to get straight as the thing it screws into is crooked.

Ok thanks. So how would I go about getting it to be straight? It would seem that the whole post is croked as it is hitting the wall of the clearomizer on one side.

http://www.free-cigs.com/Ego-CE5-Replaceable-Head-Clearomizer-_p_109.html I got the kit here with its 3 heads. I am currently using the 2.4 ohm head and I can't really get the volts up to 4. If I go to 4 or even 4.1 I get a burnt taste. I have had it soaking for over half an hour and have been using it a little here and there. Am I doing something wrong? It just seems that way and I can't seem to get the tip to screw in and get it lined up center like I believe it is suppose to be.

I have a CE5 clearomizer. Not sure what the deal is but it would seem that the post that comes from the bottom isn't lining up with the tip. Is there a way I can fix this or is it okay like this? Because I think it wouldn't work right unless the white piece is lined up with the black tip.

Well I got it today. And I must say it looks awesome. It looks just like the joyetech ego aside from having a variable voltage attachment on the bottom. It looks like it can actually be unscrewed and taken off but I didn't order the one with a removable battery. Its button is just like the joyetech ego aside from it not being as thick as the button. As it is lined up with the bottom of the device but I can live with that. Also the puff counter is a plus especially the 5 on and 5 off. And the lock in voltage is good too so I won't accidentally increase or decrease it. Anyways as a whole it is almost perfect for me. I am so happy with the device I am going to even put up a youtube review of it and I don't really bother to do that most of the time. I forgot to add that this one actually has a cap for the end where you plug it into for a passthrough unlike others. With this you can just put the end on and it won't get dust and other things to possible damage it or get the connection to not work as well as it once did.

Well I didn't get my package today. The expected time was suppose to be today. Too bad that they don't have the ability to transport packages instantly with a transporter beam yet. As this would really make things cheaper and a lot more convenient.

They do, the one I have has one but I guess it is a little bit different in a few ways. But I am guess you are meaning the store that you bought yours from.

Well my cartomizers seem to not have the wick tube or whatever it is called in the center. The one I have now I pushed to the center and it seemed to help. Do you think that may be some of the problem as could it of been burning the wick a little since it wasn't center?

I am just still confused how does 3.2 and 3.2 get 1.5?

The better version of this is here: Ego Pass-through VV (Stainless Steel) I have not received it just yet but I do know the button is suppose to be almost identical to the joyetech ego batteries if it isn't 100% the same.

Yeah, I know sorry that you have to go through such a terrible quality button. But as a suggestion maybe you can get some silly putty or something and put it over the rubber button and see if it makes it easier. Anyways if you decide that you want to get the one I am getting in the mail monday hopefully I heard it is suppose to have a button that seems to be identical to genuine joyetech egos. But just as a note it isn't joyetech. The one I am getting is trueman according to freecigs when I talked to them on chat. I will let you know more when I get it. One advantage I thought was cool I think I mentioned in the previous post is that it is only off by .01 volts under load at least that was the 18650 or whatever model it was.

Ok, I thought it just added up to 3 ohms. So I guess they actually rate the whole device to get 1.5 ohms total.

Ok, I will just run them up in voltage til I find my preference. I was just afraid that the cartos would blow up if I went past a specific voltage. But going up in .1 volts would probably be slow enough.

Must be the usb cable then I guess. As it has never done this before. It was hard to plug in to the computer and the battery is actually getting a little hot. So I guess since this is the case it is somehow pushing more volts through it.

Was it purposely or by accident? And is it a loud pop noise? Just curios as I haven't popped any attys as of yet. I think regular ego would probably not be sufficient enough to do so or am I wrong? I am off to bed goodnight.

Ok, well I was thinking since it is a dual coil it would technically make it 3 ohms but I am not exactly sure. I have heard that it is suppose to be considered 1.5 per coil thus making it a total of 3 ohms. And is it at all possible to make a cartomizer break almost instantally from vaping it too high or will it just simply shut off a variable volt device that goes to 6? I am just wanting to make sure so I don't damage the battery or the cartomizers I will be using. Also this may sound like a stupid question but can you pop an atomizer without effecting the battery? Because I was planning on trying to do a high voltage dry burn to recover the atomizers I have and if they don't recover I was wanting to see what would happen if I just kept holding it on and see if it will actually pop.

I was just wanting to know as it seems my posts are usually just sitting there for awhile with no reply for a day sometimes less. But anyways just to stay in general e cig discussion topic. I was wanting to know about how much volts I can use for my 1.5 OHM dual coil tank cartomizer made by smok tech as well as these in the new tank I should get on monday: http://www.free-cigs...zer-_p_109.html and it has these heads: One 1.8ohm (Low Resistance) replaceable Coil Head One 2.4ohm (Standard Resistance) replaceable Coil Head One 2.8ohm (High Resistance) replaceable Coil Head So if I could get amount of voltage I can use on them as well I would greatly appreciate it. Also I would like to know if anyone has used these before and what they think about them. Did I make a good buy? In the title I mean should know not just know like it says.