blucavvy

nice! what kind of switch? do you sell these?

like mcquinn said without nic there is no th. nic is what provides the th, period. i would do what mcquinn said and vape 0mg most the time and when your'e really stressed out pop in some 6 or 12mg juice. remember, the nic isn't really what made cigs bad in the first place.

it's actually pretty simple, just remember to pair the correct resistance to the correct voltage. general rule of thumb is as follows. lower ohm carto/atty=lower voltage higher ohm carto/atty=higher voltage for instance, a "low resistance" atty/carto (1.5-2.0ohm's) you would want to use basically at 4v or less, this will give you a very warm vapor. for a cooler vape try a 2.5-3.0ohm atty carto at that same 4v or less at 3+ohm's 5v or higher will give you a warmer vape. but just remember that basic rule of thumb, if the resistance of the atty/carto is low you want to pair it to a lower voltage. if it's high pair it with a higher voltage. most sites if they don't list the exact resistance of the atty/carto will at least tell you it's either a lr-low resistance (1.5-2.0ohms), sr-standard resistance (2.5-3.0ohms), or hv-high voltage (not sure y some sites call it that as it should be high resistance not voltage but anyways 3.5-4.0ohms)

send the provari back to provape they come with year warranties. If its out of warranty they should still fix it for a small fee

http://thermovape.com/collections/thermovape-e-liquid-vaporizer-accessories-parts not a bad selection

awesome uma thanks so much for all the help! questions. Can I use the atty jeff posted in a reo? Or is a bottom fed atty specific? and how does a bottomfeeder work? Does it provide juice to itself or is it just like an easier way to drip?

any idea when that will be available uma? I'll switch over to dd'ing if I have to, but is there any other setup I can look into (delivery system) that's usa made, since cartos seem to b out of the question.

http://www.volcanoecigs.com/volcano-cartos-blank.html nu uh.......really?

I <3 jeffb, what about cartos? And pv's, I know the provari, buzz and ipro, silver bullet, etc.. Are american made, what do yall recommend?

I need some help guys, I'd like to switch to all usa made stuff. I know higher end mechanical mods are manfd. Here, but I'd like to get away from china made stuff as much as possible. So hook me up with some links please :-)

I'm not sure if kanger is the manufacturer for them all. I do know that bloog, and smokeless image get their batts from the same manf. Maybe cartos as well but I wouldn't swear to it. Bloog does get first pick of batts so theirs generally have longer cutoff times at minimum.

neither on a gen2 808. Those work best with a horizontal coil carto which back when I was searching I could not find a true low res horizontal coil carto for the 808. You could use a low res boge vertical coil on it, but performance would be poor as the gen2s are regulated to 3.6v and just don't react well with a vertical coil. dual coils would draw far too much power from a gen2 to use safely. Ur just asking that battery to do something it was not designed to do. if you want to use either on an 808 you really need to look into a v4l 808.

joined

ecigs=win

no you can definately vape any mix you'd like. Vg is a bit thicker than pg like mcquinn said but all that means is it might take a second longer to soak into a carto.

I vape pretty much exclusively on 808s and vape bobas bounty most of the time which is 100% vg. So no, you can use ne mix of pg/vg you want. btw, with the right 808 you can use lr and dual coil delivery systems.

bah! jeffb is a hater. truth be told everyone is different, there was a lot of talk going on awhile back about how the "magic number" was like 8 or 9 watts, but really whatever works best for you is what the magic number is. i'll take my 6 watts and be happy with it

welcome to vaportalk and congrats on your recent switch!

halo is well known for good e juice.

i'm good at about 5.9w then

3.7v, at 2-2.5ohms boba's bounty in a cartomizer. whatever that wattage comes out to be

i did i've personally always been a fan of v4l's stuff over the gen2 808's. there's nothing wrong with the gen2 808's, they're a very good product, i just prefer v4l for the longer cutoff timer, and with their weekly sales in the newsletter that's free to sign up for their prices are just as good if not better than any of the gen2 products.

did you overfill it? those are only supposed to be filled to 1.6ml's if i remember correctly. either that or you may have gotten some liquid in the center tube during filling.

can i recommend taking a look at v4l.com before pulling the trigger on any of those.

yes they are all gen2 kr808's. Volt, bloog, halo, smoov, elitevaporworks, nexcig, and vapornine are all the ones I can think of off the top of my head. exact same batteries, chargers, cartos, etc...