twelveday

I found this image while i was surfing the net trying to find good pairings with my 3.7v and 5v ecigs. Hopefully it can help someone else as well

yeah ive added some drops to some stuff i got form vendors. Also one thing I wondered about is how do you know if something needs to steep. I never understood that. I noticed some of the bottles ive made changed to a more deeper yellowish/orange color after a few days, and even though none of them are brownish in color, they leak out of my carto sometimes brown in color out the bottom

ive only been mixing 15-20% flavoring though i will try some different types of flavorings, all the ones i have are the TPA

what are some good sweet flavors that dont taste too perfumy? other than fruit ones or are they all like that, i got some i think its sucralose sweetener which cut down the perfumy taste a bit, btw wheres a good place to get sweetener at a cheap cost i been using a bunch of it and im out already

is there any negatives about adding too much flavoring? like shelf life or anything like that

I found this image while i was surfing the net trying to find good pairings with my 3.7v and 5v ecigs. Hopefully it can help someone else as well

I found this image while i was surfing the net trying to find good pairings with my 3.7v and 5v ecigs. Hopefully it can help someone else as well

I found this image while i was surfing the net trying to find good pairings with my 3.7v and 5v ecigs. Hopefully it can help someone else as well

I found this image while i was surfing the net trying to find good pairings with my 3.7v and 5v ecigs. Hopefully it can help someone else as well

I found this image while i was surfing the net trying to find good pairings with my 3.7v and 5v ecigs. Hopefully it can help someone else as well

went through about 3ml's of juice in this one im surprised, no dry hits or flavor diminishing yet. these are way way better than ce2's imo, or even a good alternative to using the carto/tank setups.

i see 7

=d

DAMN! the rollers are out of stock, and its not a us website. =( , i thought i would never find a mod that would be as slick as my SB, hopes up and hopes downnnnn... nooooooooooooooo!

thanks uma. that mod looks awesome im gona go look more into it right now... you gona get me spending more money on mods again darn u! lol

I found this image while i was surfing the net trying to find good pairings with my 3.7v and 5v ecigs. Hopefully it can help someone else as well

What’s most important to you: battery longevity, cartomizer capacity, throat hit, flavor delivery, volume of vapor, or product overall weight?

1. vapor 2. flavor 3. battery longevity 4. cartomizer capacity

my personal ideal pv = Something smooth and sleek looking not too flashy, battery life to last me a whole day of medium/heavy vaping, something not so heavy that i cant put in my pocket and forget its even there, great vapor and taste from start of a fully filled cartomizer to the last drop. Something that looks like a whole unit rather than , heres the battery, heres the atomizer, heres the button, etc. at least thats just my personal ideal pv,

lies and slander. someone start building a mob




News Flash: a Squadron of projectile exploding e-cigarettes attacked a mans house late Friday evening. It seems we may have a bigger problem here, Decepticons have taken the form of e-cigarettes.



AUTOBOTS ROLL OUT!

you can move up to an ego or kgo kit, which is bigger than the cigarette style volts. The Volts (kr808 styl batteries) are the best stick style ecigarettes i think, i use em for my portables. I got their PCC to fix the battery life issue.

All ecigs have that sucking in air type deal, because its what you're doing basically , there has to be air holes for flow. If you want to upgrade for more battery life you can try the next step up, they are bigger batteries than the cigarette style volts though. Kgo runs at true 3.7v, you can get one of those at various places. If you want better hits and such you can try upgrading to a mod and try running at above 3.7v, (i think the volt is a 3.6v). Mods are much bigger though so it might depend on your preferences.

If you don't want upgrade to something bigger, you can always try using higher 70%+VG e-liquid in your cartomizers for your Volt, they will produce more vapor. You can also move to a low resistance cartomizer, I use the boge kr808 cartomizers. If you can't find them anywhere I buy my boge 808 cartomizers from sweet-vapes, they also have a nice eliquid selection where you can select you VG%.


ps: oh yeah, and to try to get rid of the "airy" hits, try covering some of the air holes with your fingers when you inhale

oh derp,

you can chose the ohm rating, 1.5 all the way up to 3.0, standard resistance is 3.0 isnt it?

i seen alot say the cisco spec hh357 atomizer from avidvaper, i personally haven't tried it though.

In the beginning a lot of ecigs came with 3 pieces, the battery+atomizer+cartridge (with fabric in the cartridge to hold e-liquid). That setup never really wicked well and juice would get stuck in the cartridge and not feed to the atomizer.

Battery+Atomizer+Cartridge setup:





Most people now just replace the cartridge with a drip tip, which looks like this:



You place the drip tip ontop of the atomizer, it is just a mouthpiece with a center hole, which allows you to 'direct drip' and feed liquid directly onto the atomizer itself.

If you want lots of vapor and short inhales, low resistance atomizers 1.5-2.0ohm range produce tons of vapor when direct dripping (direct dripping 100%VG e-liquid is just insane vapor )

In the beginning a lot of ecigs came with 3 pieces, the battery+atomizer+cartridge (with fabric in the cartridge to hold e-liquid). That setup never really wicked well and juice would get stuck in the cartridge and not feed to the atomizer.

Battery+Atomizer+Cartridge setup:





Most people now just replace the cartridge with a drip tip, which looks like this:



You place the drip tip ontop of the atomizer, it is just a mouthpiece with a center hole, which allows you to 'direct drip' and feed liquid directly onto the atomizer itself.

If you want lots of vapor and short inhales, low resistance atomizers 1.5-2.0ohm range produce tons of vapor when direct dripping (direct dripping 100%VG e-liquid is just insane vapor )

right click the specific image you want to copy (if image from VT gallery, a small box will appear, and you want to right click and copy link of the "direct link to this image"), should be an addres ending like this - - , then select 'image' in the post options and enter the url. no code needed =d

http://www.avidvaper...ld-901-510-306/

finally got me some drip shields recently, I dont know how I dripped without them, no mess and the overflow just gets sucked back into the atomizer so no real more problems . If you are a dripper and don't have a drip shield i strongly recommend you get one!

I got the ones from avidvaper cuz im not all for the 'bling' type ones, but empiremods carry a variety of designs.

I recently ordered some tobacco flavors from ecigexpress, dark vapure, cowboy, maxxblend, and desert ship.

they taste real good its a different world fromt he fruit flavors im used to. I ordered some "M-TYPE" (Premium) from goodprophets a while back, and dropped some of those to mix with the new tobacco flavors I received, boy it makes a world of a difference in flavor.