Leaderboard

@Adversarious1 Ok, bonded with the GX350 in a day flat. Obviously I can't speak to reliability over time but here is what I got: First thing I noticed on removing the mod from the box is that without batteries the battery door does not want to stay shut. No latching without batteries. Battery door is well marked for battery orientation and the batteries that I used fit nicely in the sleeves provided. It takes a fair amount of pressure to close the battery door with batteries installed. The battery door bows slightly with batteries installed. Sitting on a flat surface the mod will rock slightly from front to back. It sits flat from side to side. The mod is not easily knocked over. Griping the mod is absolutely perfect for me. I have fairly large hands. The shape of the mod fits the natural hand grip the best of any mod I've used to date. Very substantial feeling mod with no rattles. The firing bar is extremely stable with no movement beyond it's intended travel for firing. It is not extremely "clicky" but has a subtle but noticeable firing point. There is a very short delay in firing. Seems instantaneous to me. Obviously the mod has some weight to it per four 18650 batteries. I have carried it in a fleece jacket pocket but it is a lot of bulk for most pockets. I really enjoy the top mounted screen. I like looking at the screen after most every vape (no idea why) and it is very handy. It also came in handy testing TC. Too close to focus on while vaping but I could tell when it was going in and out of firing. A friend who works at a vape shop mentioned that other top screen mods have had failures on top mounted screens due to juice getting into the display. Time will tell. The screen is raised. I have up to 25mm tanks and they fit well. A 25mm is close to max without hitting the screen. The center pin on the 510 is stiff. I have one tank that will not screw flush with the mod. Zero problems with connectivity to tanks/RTA's/eieio. The screen itself displays all necessary information including a puff time which latches between puffs. There is a puff counter but to view it you must enter the menu system. The puff counter also latches and must be reset via the menu. The mod is designed to detect atomizer changes and query input, new or old tank. I find this somewhat accurate. I like to fire the device once without a tank between changes to ensure the new atomizer is recognized. In TC the unit appears to be using the initial atomizer resistance as a base line as there is no facility for locking resistance. Temp control is simple. NI, TI, and SS. The menu prompts you for available wattage and TCR value. I am using a value of 88 for 316L and am getting a very smooth, very well regulated vape without obvious on and off periods. In TC the temp itself is the primary display and is adjustable via up/down buttons on the mod. There is no ramp adjustment in TC. Both TC and VW modes latch. Most menu adjustments can be achieved with only the fire button using either short or long presses. Values have to be changed via the up/down buttons on the mod. The up/down switches are under a rocker style button which can be pressed in center to lock the mod. I have found no facility to lock settings while allowing the mod to fire. Pressing the fire bar along with up or down button will take you to short cuts for changing wattage and mode in TC. In VW mode the short cuts are ramp strength and mode. The mod powers up with five clicks and powers down via menu. I am estimating battery life to be between 700 and 750 vapes. Low wattage vapes ( 30 - 50) @ approx 6-7 seconds, high wattage vapes (90 - 110) at 2-3 seconds. The USB port has a rubber cover. IMHO, nice touch. Paint; Smok and paint; I already have three small chips in the paint. Although tiny and on sharp edges, I am assuming it isn't the best paint job on the planet. Opinion: I love using this mod. Fits like a glove and all functions work well and are easily accessed. I actually like the weight. Feels substantial. Sits well at the desk or end table. Rides nicely in the console of the car. It's small enough for me to palm shift while driving and holding the mod. I think my other mods are going to get lonely.

Well. Im not planning on starting my venture into mixing my own flavors until this weekend. But, I couldnt resist. I dipped in wrecklessly and 6 drops of the essence of terror and 5 drops of sinister sauce later, I had mixed 10 mils of a capella vanilla custard at 3mg and a 75vg/25pg ...it's fantastic! And so easy... Why did I wait so long???? I have no idea. I can't wait to break into the other flavors. When the stirring's done can I lick the spoon? Of course, ha ha, of course!!

no worries folks,I showed my honey the build and he got me fixed up!!it does make a big difference! and the tweezers in the coil master kit are wonderful for pinching things into place!!

To celebrate my 3 year vape-versary (Feb. 8th) I bought myself an Innokin Coolfire IV TC 75W mod, a new Limitless Plus RTA, and some assorted vaping "stuff". I'm not a high-wattage vaper so I'm hoping to get the same good experience with the Coolfire IV I've gotten with my EVic mini. 40-50W suits me fine, at least right now. That may change, maybe not. Who knows. Hmm, may need more batteries............... If anyone had told me 3+ years ago that vaping would get me off the stinkies for good, I'd have probably reacted with "yeah right". Thank goodness for the co-worker that talked me into trying vaping. I've felt physically better than I have in years, my allergy medications have been cut in half, now just to get the extra weight off. >>sigh<< Despite all the money I've spent on vaping gear, I know I have still SAVED money not buying stinkies.

I built these coils by myself, I screwed them in by myself. I'm very excited!!! clocking in. .51 eight wraps each. now to wick!!!

@smacksy I think this is a vast improvement! !

I remember 3 of those lol

Nice review

Good job on the review, Walt!

Ok, I can do that! Good call. Sent from my iPad using The Vapor Talk mobile app

Congrats on your first build! I moved this post to "Rebuildable Atomizer Systems/Coil Builds" for you.

Looks like your coils are too close to the posts and not centered over the air holes.. I don't have your atty but you can see how my coils are centered..good first try though[emoji106] Sent from my XT1585 using Tapatalk

Why not start your own thread with some questions you might have? You'd probably get some really good info rather than have the info hidden in this thread. Other new vapers might also benefit from the answers you get.