Leaderboard

Hi Chris, I was wondering. Is there a way to make the "reply is merged" featured user controlled? Or make it so a user can toggle that feature on and off? once in a while I might have an after thought on a post . Sometimes I want my afterthought to be a separate post for clarity. So the other person knows I have made an addition to my post. A reader might not catch that I have added a short line to a post, when he has thought that he has already read that post. Sometimes the merge feature is fine when you are responding to a post when you know the originator is not there. But when the originator is actively reading your posts, they could miss a point that was added automatically with the merge feature. just a thought

Featured disabled, case adjourned.

I have tried a lot of different builds using the Subtank mini RBA, the one that works the best for me is a SS 316L .5 build. 5 wraps around 3mm with 28g wire. Other people probably prefer something else, but everybody is different with different tastes.

If I showed you guys meds, you would probably be afraid!lol

I have been using a 160w dripbox for a day and a half now, the dual battery setup has lasted 2 7ml tanks of juice. The mod itself works well. I have been using TC because I'm not used to dripping, and didn't want to burn the cotton when the wicks went dry, which has happened more than I would like to mention. The mod itself is about the same size, and shape as the RX200, it has a hinged battery door, and a magnetic bottle cover, they both work well. The kit comes with what they call a velocity style build deck, 2 square posts with 2 holes in each post, besides a regular dripbox coil which is also very easy to rebuild. The only problem I have found is the air inlet is too high on the tank (near the top of the tank) which causes the tank to get very hot. I have temporarily solved this design flaw by turning the tank over so the air inlets are on the bottom, and it works much better, and runs cooler. When I turn the tank over I can't push it down all the way because if I do the air will be blocked, I also lose air adjustment when turning the tank over, but I run it with the air open all the way anyway, so I really don't lose anything. As far as performance goes I get bigger clouds, and better flavor compared to the Subtank minis I normally use. Currently I'm using 2 8 wraps around 3mm 28g 316L coils, that come out at .42 ohms total. Works for me. The drip tip has a 11mm bore all the way through so airflow is not a problem. Maybe Chris can get more of the Velocity style build decks from Kanger, I know I want at least 2 more.

Mine are much the same. Two rows in my desk cabinet, plus four bottles sitting ON my desk.

This actually drives me nuts. Often I'll reply to the product mega request thread (Reply to one person, then another, then correct a mistake) and it's glanced over. There is no way, that I can think of currently to allow it to be user controlled. What I can do though is just turn the merge feature of completely. I know more often than not, it causes more harm than good. Thoughts?

Good thinking

Yep, the Eleaf iStick 50W can go down to 0.2 ohm resistance.

The Istick can run a .3 coil with no trouble, I regularly run.25 coils in my Starre with my iStick50.

YUP vaping beautifully on my istick 50 THANKS

Bam! Glad you got it.

@Bebop @cany @Tam BINGO.. I blew it out upside down..... then checked the coil and base....it had a double o-ring....Thanks all three of you.... it worked! I cleaned out the base and saw the o-ring. About the rba...can I rebuild it to 0.3?

Ahhhh the old double oring I forgot about that Its got me more than once

I wanted to add - dont forget that that once you get excessive gurgle, the juice could travel down in to the base. Flooding in the base can not only cause gurgle which can't be burned off, but it also disrupts your airflow and could potentially cause electrical inaccuracies that make the tank not perform well. If the gurgle doesn't clear up by burning it off, pull the base off, remove the coil and dry it up, and rinse the base and dry thoroughly before reassembly and that should take care of the gurgle. If if your still getting gurgle after that then you might have a problem at the Oring on the coil/base, either no Orin's or a double Oring.

The higher the VG content, the thicker the juice. The higher the PG content, the thinner it is. For the gurgling, try turning the tank upside down and blowing gently into the mouth piece without powering it on. That will "blow" the juice back into the tank and out of the center piece, it works for me in various tanks and most especially in my regular subtank when I use it.

@Edna Im gonna look and now Thanks for reminding me If I cant find it im just gonna get another deck for it

Use it in Watt mode not TC try around 30W

I love my delrin drip tips.From the stock tips that came on my subtanksTo the delrin chuff cap that came with my Dark Horse RDA...I haven't found a better drip tip yet.. Sent from my XT1585 using Tapatalk

I was gonna say, you just showed us all your meds, and your real name, too (on one of the bottles). My dad has early COPD - hasn't stopped him from smoking, sad to say. He has diabetes, too.

Thank you for all of you info everyone! I actually do switch flavors a lot, trying to achieve that flavor. I looked up the alien kit and am strongly considering it, it looks like a really decent vape, if I can learn how to use it But I always research the proper ways to use something before I even recieve it. Is it relatively easy to use? I am impressed with the wattage on it versus what I've been vaping with the Subvod mega.

All the batteries I receive I have to charge. I have never received a fully charged battery.

I feel you on the steel,I hated the one on my crown 2.I thought my coils were going bad and it was a funky metallic taste from the steel.plus it was way too wide for my mouth,I prefer long and curved,I've discovered,I picked one like that up from my local vape shop and fell in love!not only was it more comfortable for me,it keeps my lipstick off the tank and I think the flavor is better.I have just ordered a really nice polished Ming wood tip from the store here,also the big Ming tip,that is plastic.I ordered some tips here similar but not quite the same and had some spitback,but I think that will resolve at a higher wattage.where did you pick up the jade?that just sounds delightful !