Leaderboard

It's spellbinding at night

Welcome to Vapor Talk. Someone with more familiarity with the DNA 200 chip will probably be along any moment, but in the meantime, you can check out the Steam Engine site and start getting familiar with with some of the calculators on there. Even though I can practically build a Kanthal dual coil setup in any of my RDA's that measures out to .25 ohms (+/- .02 ohms) in my sleep, I still refer to the calculators on Steam Engine regularly.

@ChristopherOh my gosh, I already am It's deliciously wicked. Creamy and smooth. Thank you so much and thank the awesome people on the quick shipping from the VT store

Got some King of Churn courtesy of @Christopher from the VT Store! Butterscotchy goodness and a few other juices from Central Vapor and a all black pico with a few other odds and ends.

Now about that burnt lip,if you are in love with the drip tip other than it being metal,I would check out the vaportalk store for a replacement Delrin tip that is similar.all my tips from my nebox,and toptank mini fit,I just preferred the one it came with,but I have not had had my lip burnt!I think as long as the tip fits a 510 threaded tank,you will be okay.if you have a local vape shop,I think mine sells them for 2.50 and has a wide selection.now I must correct myself,lol the coils I bought here WERE stainless.happy vaping!

If it's coil based they do "max" out at a certain point but what exactly is dependant on the device/coil/other aspects. What wattage are you running them out? So for example let's take my setup at the moment. I'm using an iStick 40w with a Nautilus Tank and 1.8 ohm coils. There are a couple of things I have to do to keep my coils long lasting (in my experience) The Nautilus coils have some large holes at the bottom. Though I may still have say 1ml of eliquid left in my tank, I need to fill it at this point because otherwise the coil can't pull in enough liquid. This causes it to run dry. And while it might not "burn out" it will taste horrible. Basically the coil becomes useless. This is the same for any tank, keep it filled as often as possible. Running low on e liquid is never a good thing. I'm not sure off hand with the crown coils/tank but each tank has a similar happy level. Wattage - I run my device around 9 watts in the morning and 10 +- in the evening. I could crank it up to 40watts but the coils would completely die on me. Basically, at least for me, I noticed these coils don't run well above 11 watts max. It starts tasting burnt so I know that's the limit. Your coils will have a similar limit, start low and move up slowly until you find the max wattage they can handle (There is probably a mathematical equation for this but, cranking up slowly works the same) If you're running them above spec they're going to die out. But, if you find that sweet spot (for me again it's around 10 watts) a single coil will normally last me a solid week. I can easily go longer (2 weeks no problem) but I find the coil just doesn't perform as well and gets a bit "stiff" over time. It's not that I have to toss it, I just prefer to change them out every 7-10 days +-. Edit: oh by the way, 0.5 ohms should be run around 20-40 tops. (Again find that sweet spot for your particular coil)

Well...I done went and did it. A video review of the TFV8 Baby Beast.

We are just glad you are alright, comp.. No stress, ok? Take the time you need to get settled again. We've missed you, is all. Glad you're ok and out of the grips of dealing with the mentally ill. Hope you guys can recover and return to a normal life. I know it's rough. Good to hear from you.

Well,mine arrived today,lightning fast from the vaportalk store.I have to brag on them,top notch service,great prices and good secure packaging.i put in the .25 ohm coil it came with,i was a bad girl and didn't soak it.ran it up to 80 watts and burnt it out!I am now using the .5 coil it came with.loving it!cranked it up to 60 gradually,then lowered it to 42.5 with partial airflow,after further tinkering I am now at 35.2 full airflow.this is the best tank/coil combination I have ever used.top notch flavor,it's very sturdy!haven't taken it for a spin in tc mode yet,but I will when I break out my mocha juice.one thing to remember....close your airflow all the way when not in use, to prevent leaking!the vapor production is also top notch to any other tank I have used.Will definently be picking up a few more!

Steam Engine is a great resource. I use it a lot. Safety is important it's great you're trying to learn all you can. I'm newer to building but everyone here has been great in giving excellent advice.

Thank you sir, Yeah I'm looking in to find out all about that I have a goon rda in my cart along with some 26g ss316l wire from what I've been reading on to get things started but wanted to find out a little more bout it with combining my dna200 mod with a rda on temps & wattage KiLo_84

I am vaping on the .5 I had a suspicion about the leakage,and it proved right.you have to keep the airflow fully closed when not in use.plus because of the airholes in the bottom of the coil,it floods.I took mine out and found a decent amount of juice.a q tip will do the job nicely.I would reccomend cleaning it everytime you clean or fill your tank.yes it is a pain in the butt.but mine started dripping a bit,so I investagated.it says in the user manual to keep the airflow closed when not in use to prevent leaking.the other I just suspected.I haven't had a problem since,and I vape about every hour,I have been up since 5 ,so that's five hours of no leak.hope this helped,and happy vaping!

Woot! Hope you enjoy

That's likely Evan our Retail guy He does a great job taking care of the online orders.

Not to stick my butt in ,but not only is the shipping free,it is fast!I placed my order last saturday.and with mail not running sunday,and Monday being labor day,it got here tuesday!I thought that was pretty dang spiffy,especially with shipping being free!everything was nicely packaged,I had no fears of my product being damaged at all.the receipt was detailed correctly and someone had written thank you with a smiley in green highlighter at the bottom,haha!

Welcome to Vapor Talk I'm sure someone here will be able to answer your questions. There are some really great and knowledgeable folks around here. (though, they're probably still sleeping ) I recommend exploring some of the topics to see if your question has been covered or can offer some help in the mean time. Congrats on giving up the analogs

I'm not a healthcare professional so I'll tell you to talk with your surgeon and be truthful. See what he advises for you.

My husband had a delrin drip tip that he gave me. We were supposed to go out this weekend to look at more, but didn't have time, and this one suits me just fine - it's narrower, and longer than the other delrin drip tip I have, so it feels more natural, and it's easier for me to keep the inside of my upper lip off it without tipping it to an angle that would cause the tank to leak, lol.

Well I tried 20 watts and got absolutely no flavor.it took cranking it up to 42.5 and partially closing the airflow to please me. Will keep experimenting, may be running the stainless coil in tc mode at lower wattage will help,but hey,I'm always down for an adventure! Thank you for all the help,you wise,wise people!

Mine leaks too and I have no clue why. :/ don't know about the coils I vape on .25. Sent from my SM-G920V using Tapatalk

Air flow is going to make a BIG difference in the amount of watts you can pull through a tank with higher power applied. My ProTanks I couldn't put that much power through anymore - I'm talking down to 6 watts - but the Kanger ramped it up. Even my Aero tank I couldn't really pull the power up - still not enough air flow. With my Crown 2, right now, today that is, I'm running it at 35 watts. That's what I can deal with today. Tomorrow I may want more, or less. But today it's not burning my lips off and the taste is still good. I keep my airflow running wide open - both on this and on my Nautilus.

I am running it on the rx200,will for sure take that advice,and thanks! I don't generally vape below 20....ever but won't push it beyond 40 for sure now!

Excellent Review Thanks

I really don't care for the RBA..too small and hard to wick..least it is for me, especially compared to my Herk RTA-2 that has a large velocity style deck, lots of room and large juice channels.. I like the V8-T6 coils at a comfortable 125-14Ow...of course I'm a DL hitter, but this tank with that coil truly fogs up my room and produces excellent flavor..and the G4 coil is excellent at around 100w as well....[emoji14] Sent from my XT1585 using Tapatalk