Leaderboard

I agree with Jason... Those batteries will be great for the Wattage you're using. I'd not push them (together) above 150W. I personally run a few of my single-18650 MOD's up to 50W with the LG HE2 batteries and have zero issues with them. They are great batteries. Jason's other suggestions for spares (LG HG2 or Samsung 30Q) are spot-on. You should have at least one spare set to charge while another set is in use, and it wouldn't bet a bad idea to pick up six (two sets for spare). Be sure to label them with a sharpie so you know which batteries you have mated together. I use alphabetical... A, B, C, etc. for those used in single mods... A1, A2, B1, B2, etc for dual-mods... this way I can keep track of not only mated sets, but also their position in the MOD, so I can rotate their position each time I change batteries.... 1-2-3, 3-1-2, 2-3-1, and back to start-position, but I"m OCD that way... or as my family tells me... CDO (alphabetical, as it should be, lol).

With a little experience you'll be able to tell when you need to add more juice. You'll get a harsher vape, that's a clear indicator when you're new to it. I usually got 5 - 7 hits before needing to add but it depends on how long of a draw you take. Saturate wick well but don't drown it. When the quality of vapor goes down or you get a harsh hit, that's when to add more. You won't burn the coil unless you dry burn too long, the more likely thing is that you'll burn the wick, which would be very unpleasant but you'll just need to rewick the coil then. Hope that helps.

Hello all. My names john and im new to dripping. About a week or 2 ago i purchased a nemesis clone from hcigar. I have been using a mutation x4 on it. Since last night i have been having problems with it. The flavor and vapor production with a fresh battery at 4.2 feels the way a dead battery used to at say 3.6v. I have since cleaned the mod (complete disassemble including the switch and submerged in isopropyl alcohol). I also boiled some hot water and soaked the atty in dawn and hot water without the orings. On a fresh coil and fresh cotton this thing produces less vapor and flavor then my cloupor 30w regulated device. https://vimeo.com/161852124

Those batteries will work great at the power you are using it at. Personally with a good 20watt battery (which the HE2s are, I would keep it below 150 watts or so, and it will be very safe, no matter how low you go on the build. I am being a bit conservative by like to err on the side of safety. At 45 - 60 watts the he2 will not be the longest lasting battery. I would pickup another set of HG2s or Samsung 30Qs to keep charged while you use the other set. It is really nice not to have to wait for a set to charge.