Leaderboard

Good. straighten out those coils, measure their resistance and make sure it's safe before you go too crazy with it. Good luck. Do not blow yourself up!!!!

What resistance is your ohm meter reading on this coil? Just curious...

He was the second highest in his school. He is planning his future too, but I think he will listen to the recruiters.

I agree with Tam...what is the resistance on this build. Also you do know that your not supposed to dry fire titanium like that, because it releases toxic chemicals. When i build titanium coils i always wash and dry the wire before building, but never dry fire.

Yes I did change the juice, that didn't help. So I looked at the coil, it was touching the side, I moved it just enough that it didn't touch any more and it stopped the popping. It was brand new and came that way. Will start checking any new ones I get before I use them.

Having a clear image would help, but from what I see, what you have is direct sort of every coil. Facing coil looks to be hooked to both top Pos (+) terminals Right side coil is hooked to both bottom Neg (-) termanals Left side coil is hooked into the Pos (+) at the top on the screw and the bottom is hooked to the Neg (-) pole? I can not tell for sure. The coil in the back I can't tell how it is hooked in. Each coil needs a Pos (+) and Neg (-) connection to complete the circuit. With out that, or doing it with one and not the rest is a broken circuit and Direct sort circuit and if it were not a regulated Mod, a face bomb.

Any chance you could do a clearer picture in focus? Its not good enough to diagnose. Very hard to see actual connections. It looks like it should be one leg up, one leg down like this build.

I'm a big fan of IPV and Sigelei.... But, if you have the Wismec RX200, and you're looking at other 75W MODs, you may also consider the Wismec Presa 75W TC unit. It's a single 18650 MOD, small form-factor, and performs great! And, BTW, it is very inexpensive as compared to the Sigelei or IPV you mentioned

Can you post a better image... Looks as though there is no coil so yes it would read "No Atomizer Found".