Leaderboard

Bought the Joye Ego One

Very normal. When my juices get to a certain darkness, apart from it tasting different, it's a good indicator for me to clean out the tank and start fresh.

old dirty draws

Just for all the help and sales, they should give you an iStick 50W. That was so nice of you, and I bet the girl behind the counter was very appreciative.

I stopped off at the local B&M last night, only to buy a raffle ticket... they're giving away a ton of goodies and donating the raffle money to the local youth soccer and little-league baseball... but I digress... Anyway, while I was in there, several people were at the counter looking at tanks and box-mods, and the only sales gal in the shop looked terrified, lol, so, I stepped in and gave my opinions to help her out. She ended up selling three iStick 50W, and several tanks (with spare coils), including Sub-tank minis, Aerotanks, and a Kayfun Lite-Plus... and yes, a meter, wire, and cotton pads... I even built a 1.4 Ohm coil for the KFL+ to show the new owner how (and how to be safe)... I hope she received a commission, as well as an education, lol... Now... to win one of the raffles for an iStick 50W for myself

It could just be an issue with their site and the check-out process. If the order shows processing, and the money has been accepted, you're probably okay. I would also contact their customer support, as Jeff suggested, to let them know their site is jacked-up, and also to verify the order is truly being processed. Honestly, that would not be the first site to have a check-out glitch... even Amazon has left items in my cart before, even though I purchased them... but at least the issue with Amazon cleared itself after a couple hours (purchased items were removed from my cart)

Also, make sure your magnets are facing opposite... they should repel each other, not pull towards each other. 3600mAh? I'll assume that is a Panasonic button-top battery? If so, gag8tor is correct... your mod will work better with a flat-top battery, and I'll suggest the 20A Samsung 25r...or the purple Efest 35A. Samsung batteries are my go-to, for their reliability (and cost). Also, just out of curiosity... what is the Ohms of your coil build?

Are you using button top batteries? Could be that you need flat top batteries.

I think I may pull out my Magma RDA sometime soon. I haven't touched that thing since I decided that I'm an RTA guy almost a year ago, but I do remember that the Magma had awesome flavor.

Congrats Tug. I just hit my 1 year mark too! Feels great.

Dudes! Check out Twisted Messes RDA from CompVape! It is bad ***!

You might also alert your credit card company to reject the order/payment just in case.

have you called customer support? 832 203 4685

50ml of Peanut butter bananna cream blend and a Naut mini Good thing I went there just too look around lol

Ordered a Sigelei Mini, and a couple of Samsung batteries for it.

Just ordered a Kanger subtank mini, 8 Samsung INR 18650-25r's (for my Flaskman vapor flask), one pack of subtank mini nickel occ coils, and tempered ni200 (29ga, 28ga, 26ga) from the UK (couldn't find tempered, anywhere in the US at the time).

I ordered my first bottle of PBFB from Fadora this afternoon...0 nic, max VG...but that's for my Mutation X v3 and Limitless combo...I have plenty of Charlie Noble juices in various flavors for the Arctic and other juices for the Herakles. Beautiful thing about all these tanks I'm aquiring along with all the juices I've bought...I'm quickly learning which juices vape best (for me) in which tanks.

Hopefully Last but not least...... Supplies: 1.Empty dropper bottles- 3ml, 5ml, 10ml sizes are great for mixing. 2. Pipette or syringe with blunt needle. Personally, I prefer using a syringe for mixing--More accurate. 3. paper towel or rag for handling any spills or messes 4. Labels are good for identifying your new mixes. If using paper labels I have found that applying scotch tape over the label keeps the label legible. 5. mixing calculator helps with acheiving the correct nicotine strength. There are other calculators out there, but I like Todd Muellers: http://www.todmuller.com/ejuice/ejuice.php . I usually put my flavor at 30 - 40%. I like lots of flavor. Mixing -can be simple (combining premixed liquids to create a new flavor) or more complicated, mixing from scratch. Or somewhere in between. 1. Always start your mixing or experimentation with small amounts. Its much easier to throw out a small amount of liquid if it turns out bad. The 3ml bottles are great for experimenting. 2. Its a good idea to keep track of what and how much you have added to your mix--just in case you want to make more. **It is easy enough to mix 2 or more premixed liquids together to get a new flavor. This is easiest if you are using the same nicotine strength. i.e.- Tobacco 18mg/Watermelon 18mg/menthol 18mg/pina colada 18mg. The amounts would depend on taste. Start with 5 drops of each in a 3ml bottle, shake and vape--can adjust the flavor as you want by adding more of one of the flavors. with the menthol--using just 1-2 drops/3ml will give a nice cool throat hit without tasting like menthol. ** Can use PG/VG or both to cut a higher strength liquid. i.e.- 24mg premixed liquid 1ml can be mixed with 1ml PG or VG to make 12mg/ml liquid. If cutting a premixed flavor, keep in mind, it will also decrease the flavor. If you don’t want the flavor loss you can cut with 0 nicotine strength in the same or a different flavor. You can also use flavorings to boost the flavor. use the calculator to determine how much PG/VG to use to achieve the desired strength. Just put 0 in the water and flavor boxes. ** Adding Flavoring to premixed liquids This is actually one of the easiest forms of mixing and is a great place to start the DIY journey. We all have flavors we don’t really care for, but by adding flavoring you can create a flavor you like. Keep in mind--when adding flavoring it will dilute the nicotine strength of the premixed liquid. one way around this is to get some unflavored higher nicotine liquid- i.e. 36mg that can be added to your mix to keep the nicotine strength at your desired level. My preferred nicotine level is 12mg/ml--so I will use that dose for mixing examples. i.e.-- cappuccino 36mg/ml, 1.7ml + FlavourArt apple pie flavoring 1.5ml + VG 1.8ml for a total of 5ml 12mg/ml. This is where the calculator comes in handy. Just put in the numbers, hit enter and the calculations are done for you. This is where having a syringe is helpful. However if you are using drops, I have found that 30 drops of PG = 1ml and 20 drops of VG = 1ml. You can use more than one flavoring: cappuccino 1.7ml + apple pie flavoring 1ml + Vanilla 1ml + VG 1.3 ml = 5ml 12mg/ml Don’t be afraid to mix more than one flavor. When cooking, most dishes require more than one flavor to get the right taste. ** mixing from scratch You will need PG and/or VG Unflavored Nicotine liquid ( I usually use 36mg/ml) Flavorings of choice i.e. Easy Watermelon 12mg/ml 3 ml PG or VG 1 ml Lorann Watermelon flavoring 2 drops Menthol flavoring (Flavourart) 2 ml 36mg/ml Unflavored liquid i.e. using multiple flavors: Apple Pie (6ml) 18mg/ml 3 ml 36/mg unflavored 1 ml FlavourArt(FA) Apple Pie 6 drops (Flavourart) Irish Cream 2 drops (FA) perique black (tobacco) 3 drops (FA) menthol .5ml PG .5ml VG 3 drops hazelnut 6 drops vanilla ** Misc Notes Tobacco Flavorings are very, very strong--a little goes a very long way. A couple drops to 5ml will give a nice background flavor. If using more, add a drop or 2 at a time to taste. Lorann flavorings are very concentrated. You would use less Lorann than you would with other flavorings. Avoid flavorings with oils or sugars--both can damage your atomizer. If you find your mix needs to be sweeter there are a couple of options: 1. Loranns cotton candy or Marshmallow flavorings are great for adding sweetness. 2. DIY flavor shack carrys Eythol Malto which is a sweetener. 3. I actually prefer the Lorann--overall sweeter tasting. 4. I add a few drops of Menthol to all my mixes-adds a cool throat hit and enhances the flavor. Just a little does not taste like menthol. If you like menthol, just add more. 5. always start mixing with small amounts and keep track of what and how much. 6. For taste testing--dripping works best. Mixing is a lot of trial and error in the beginning. Add flavoring a little at a time until you find the balance you like will help keep waste to a minimum. I am hoping others will be able to add their tips and ideas. the above is just my own opinion and my own experience. If all or part of this is confusing please let me know-writing documents is not my strong suit !!!! Merry Mixing