Leaderboard

For others using them do you find charging them to be quirky? I use only JoyeTech chargers that are supposedly the best and have always worked well but with the Spinner 2s I find the green light will come on and the light will go off on the battery looking like it is fully charged. Then I can take it off the charger and put it back on and it will charge for sometimes a couple more hours. It almost seems like the feature that changes the light to indicate the remaining charge in the battery may interrupt the charging process. The Spinner 2s fire button glows white when between 60-100% charged, blue when between 30-60% charged and then orange when 30% or less. When charging the light changes as well to indicate how far along in the charging process the battery is. It seems when the light changes the charger stops and I am having to unscrew then reattach the battery to the charger. Anyone experiencing this or is it me?

Simple fact is, the government will do what the government wants. You just have to find your way around it.

No its two separate coils. Its a stillaire clone by cigreen. Its actually got some pretty big post holes in it.

3 ohms is crazy high resistance. That's the limit on most devices and I don't know how you'd fit all that wire in a kanger coil head body. Certainly not with anything but 32g. Yes coil wraps can touch. You don't want them overlapping. Youtube microcoil or in your case it would probably be more of a nano coil. Just the other day you were asking for getting your coils around 1.6 ohm now you want 3? I'm getting as confused as you are lol.

Lol... No prob, that's how I remembered it chase it use to throw me off all the time too.

.34 dual coil build with 26g on copper overdose with overdose RDA (enlarged airholes to 1/8ths)

Just threw 20 batteries into the classified section.

Ha, Ha. An unfortunate evil in all those "organically" manufactured smokes, Bahahahaha.

PS, whats really cool and you`ll know what I`m talking about is this, The draw is ALWAYS PERFECT. No more sucking a golfball through a straw. NO more duds, no more cow manure, ha, ha. :?)

I quit ten years of Pepin`s, Padilla`s and Padron`s with Vapor. Today its been 2 months and I would`nt go back even if the cigars were free. Its entirely possible, and I can tell Vapor is much better for me, my wife knows too, :?) (Wink, wink) Now, if you have`nt tried Highbrows Perique, its the ticket! It brings the spice! Best, Randall

If you want to really cloud chase I think you'll have to eventually get a top cap drilled out with large extra air holes. Patriot, Tobh, and IGO W are all options I'd say for that. If you want a good quality rda with good stock airflow and easy to build on I suggest the zenith v2. I love mine and the allen head posts provide the best connections I've ever used. They tighten down and stay tight no matter what. Never had issues with one backing out and they give a superior connection to every rda I own. The post holes are like large slits so parallel and twisted wire builds are pretty easy to fit. Down to dual 24g or single wire 22g I'd say. I stick to twisted 28g or dual 26g on mine usually. Gplat wire goes really low for resistance so I don't ever need more than that for dual coil builds. When you run the airflow wide open it's pretty good and I get great clouds. I build down to about .2 on mine without it getting hot. If you're looking to go lower than that you'll need more than stock airflow and you'll have to get replacement top caps or drill out the stock holes and do extras on some other rda. The IGO W is cheap and a good starter I think. A few places will even drill out the top cap when you order and you can buy replacement top caps that someone has drilled out to be for cloud chasing. You'll just have to run it with no drip tip or a really wide bore one maybe drilled out as well.

IMR14500 I have been using Efest lately