Leaderboard

In addition to having more throat hit with pg, you will also get better flavor

Another double barrel build in my Russian. I made a mistake and it ohm'd out at .5 so I got rid of it immediately, but it was a much cleaner build. I must admit though this one produced a ton of vapor.

I don't think it is fair to bash or belittle anyone that sub ohms. Yes there are issues with kids doing this and that is a shame. There has always been issues with the attitude of Young Dumb and full of %^$. That will be the case no matter what it is. Go to Daytona Beach during spring break. I think there needs to be some tolerance here for those that do Sub Ohm and do it for the simple fact to stay of analogs. Yes Vaping is a touchy issue because of the FDA, but we all know that will not change. I remember when people making homemade Mods from flashlights were bashed for bringing on the wrath of the FDA and blah blah... Now look at what we have today, that is what has brought us to point of having Vamos, Provari's, Twist batteries, and so on. If it is not for you, that is fine.... If is then that should be fine too. If a person is good with a Twist battery and KPT pro 2 and it is what keeps them off analogs... More power to them. If a person needs more than that to stay off analogs, who are we to tell them they are wrong for doing so? Sub Ohming is only silly to those that don't feel the need. How boring would this world be if every one did the same thing because it was what a few people dictated to you that you could do. It is no different than the person that Bashes and belittles vaping as whole because they quit cold turkey. They think anyone that vapes is silly and weak minded. I did it why can't you attitudes are insensitive to others and narrow minded.

As promised. Here is a tutorial for building a VV wood mod. Using a OKR-T 6 amp switching regulator, Voltage display and dual 18650 batteries. This one is highlighting the differences from the other tutorial I posted before. So If you have not read it (What the heck is wrong with you ) here is a link to that post to reference back to. ?do=embed' frameborder='0' data-embedContent> Here is what we are building Parts List Mad Vapes 510 Connector 18650 Batteries 2 at least Voltage Display - Only if you want to mount a outside display on the mod. It can be monitored with a screw on display or multimeter. But it is much easier with it already on there. Horn Switch Vapoligy (2) Pairs Battery Spring Plates - Battery Spring Plate Radio shack PCB- Printed Circuit Board They have a few get the one that has a mix of 2,3,none, and continous connections between holes they sell for aroung $2.50. Or if able to make your own. Small magnets If needed Digikey - Once again a big thank you to bstedh on the ECF forum for a great post and diagram. Here is a link if anyone wants to read Easy OKR-T VV mod OkR-T Switching Regulator comes in 3,6, and 10 amp sizes. I ordered a 6 amp for this one and a 3 amp for another mod. Very happy with both. Batteries last a lot longer than linear regulators. Power Supplies - Board Mount | DC DC Converters | DigiKey A 200 ohm Trimmer/Pot 3352T-1-201LF Bourns Inc. | 3352T-201LF-ND | DigiKey A 200 ohm resistor - there is a discussion on the thread over what size resistor need to set upper voltage but went with recommended. MRS25000C2000FRP00 Vishay BC Components | PPC200ZCT-ND | DigiKey Home Depot 1/4"x 1 1/2" x 24" Hobby Board - I went with the alder on this one. 3/4" screen - once again you can use any scrap piece you already have. 20 to 22 gauge wire Tools Needed Same as before See Previous Tut ?do=embed' frameborder='0' data-embedContent> Cuts needed Hobby Board (4) 4 1/4" pieces look for interesting patterns and label front and back. Others label left and right. (2) 2" pieces label top and bottom (1) 1 1/2" Label Angle piece 3/4" screen (1) 1 1/2" piece label support (1) 1 1/4" piece label U (2) 3" pieces label U Once again feel free to substitute what you already have available for what is listed here. First steps: Hopefully I covered everything you need to make your own. But if you have any questions or see any safety concerns please fill free to post. Any and all Comments and or critiques are greatly appreciated. Also if you do make one please post a picture for me. With this regulator and these batteries It seems I can vape for 2 + days with lots and lots of vapor between charges. And Once again thank you to Christopher and jeffb for there assistance to me. Enjoy and Happy Vaping!

Hey xCOXINATORx, one of the ladies at my work knows a ton about Spartans. She vapes with them everyday, and does a lot of her own coils and such. If you email her (susan@triple-ecig.com), I'm sure she can answer your questions.

If you want to really cloud chase I think you'll have to eventually get a top cap drilled out with large extra air holes. Patriot, Tobh, and IGO W are all options I'd say for that. If you want a good quality rda with good stock airflow and easy to build on I suggest the zenith v2. I love mine and the allen head posts provide the best connections I've ever used. They tighten down and stay tight no matter what. Never had issues with one backing out and they give a superior connection to every rda I own. The post holes are like large slits so parallel and twisted wire builds are pretty easy to fit. Down to dual 24g or single wire 22g I'd say. I stick to twisted 28g or dual 26g on mine usually. Gplat wire goes really low for resistance so I don't ever need more than that for dual coil builds. When you run the airflow wide open it's pretty good and I get great clouds. I build down to about .2 on mine without it getting hot. If you're looking to go lower than that you'll need more than stock airflow and you'll have to get replacement top caps or drill out the stock holes and do extras on some other rda. The IGO W is cheap and a good starter I think. A few places will even drill out the top cap when you order and you can buy replacement top caps that someone has drilled out to be for cloud chasing. You'll just have to run it with no drip tip or a really wide bore one maybe drilled out as well.

I start school again at the end of August, so I will probably start trying with grapefruit a day or two before I go back. Until then, article research here I come!

and you couldn't bring yourself to build a 32g 7.5 wrap 1.6ohm coil? lol you would be surprised at how frikken fast it fires and how much vape a single 1.6 coil on 32g can put off in a hurry... I can more than keep up with my buddies 28g sub ohm build...

sounds like it is not wicking fast enough... or you are chain vaping and it is not able to keep up...either way it means you are burning the wick. I'm no KPT expert as I avoid kanger products like the plague...but my guess is you are using a thicker juice with it and it doesn't like it lol. you can soak your coil in alcohol for a couple hours and change out the juice to get rid of any lingering burnt taste and clean up any gunk on the coil, but you may still run the risk of burning it again. sometimes you can get it burning better by limiting the airflow into the tank to help pull more juice into the coil whether it be via airflow limiter, or your finger over the air intake to pull more juice in, but only give it a few draws like that...doing it too frequent can cause flooding and gurgling (too much juice)

I was thinking of trying Grapefruit, too... And as for the mold/mildew studies, I will definitely have to look into that. I am a Bio major, so it's nothing for me to get my hands on a microscope. It could even be a research project of mine! LOL I could actually see people going for a Blue Cheese flavor, sadly. Especially if you can figure out buffalo wing hot sauce, too! Wing flavored e-juice. It would probably just be called "Hooter Juice" LOL!

That's what it's all about. Finding your build. I don't post here much because I am pretty content with my single 7 wrap parallel. It hits the spot.

Two words. Natural selection.

I can only like it once, so here's some more. Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like ​Like

Also make sure you clean the kayfun before using it or your going to vape on machining oil!!!

Lol. *waves white flag*

I tried to "Like" your post, but apparently, I have reached my daily quota of like. This is what happens when you like too much.