Leaderboard

Recieved my eVo apple pom smoothie juice the other day. Thanks to Brian at the veteran vapers give aways I've found a great flavor!

My most recent build is my personal best yet I run 32g 7.5 wraps 2mm size. comes out to 1.6ohm. (I wrap around a 5/64" drill bit. you can pick one up for $3 at the hardware store) and what I have learned with cotton...less is more... don't try and stuff a bunch of cotton in there. wicks slower. make it a very loose fit and fluff out the ends by the juice ramps. also try to keep your coil as close and as centered as possible over the air intake hole for best vapor results. I get more than enough vapor production off of my 32g wire. and it has the added bennefit of instant vapor production the moment you push the button. no waiting for it to heat up... the thinner the wire the faster it gets hot as it is less material to heat. heating larger diameter objects takes longer than heating smaller diameter objects. Just a little food for thought. my 1.6ohm coil fires 3x faster than my buddies 28g .8ohm coil...

my latest coil... just a simple one, but all I was going for was instant vapor production. not cloud chacing. just didn't like having to wait for my vapor to be produced lol.. Guy at the vape shop couldn't wrap his head around the concept I had and kept trying to talk me out of buying 32g wire saying oh 28g is the best blah blah blah 32g sucks blah blah lol... latest build is 7.5 wraps of 32g @ 2mm size, 1.6ohm. that wick wasn't the final wick... I was taste testing about 5 different juices and using my kayfun like a dripper to figure out which juice I wanted to comit the freshly cleaned tank to... so I went through 5 scrap pieces of cottom as wicks figuring out which flavor was going in the tank, then made my final slightly longer wick. Thing works exactly like I thought it would. instant vapor production the moment I push the button. absolutely no delay love it Dude kept saying oh you should sub ohm and use mechanical....pssssh My buddy has the same kayfun, built a subohmed 28g coil and mine fired over 3x as fast every time lol. smaller wire may be more resistance, but smaller wire also heats quicker than larger wire. also cools quicker so it doesn't make the whole tank hot after taking a few vapes in a row vs the larger wire... I've ran both 26g and 28g in this tank and by far like my 32g build the best.

Until and/or unless Sony starts remaking the 26650

There are the Panasonic CGR26650A 50A. http://vaporjoe.blogspot.com/2014/05/sony-replaced-panasonics-cgr26650a.html?m=1

Oh for sure. But I did the airflow too. So I'm guessing it's either the larger coil, the wick, or the combo of both. I will give it another try when I need to rebuild the kayfun. I haven't touched it In the last few days though. The new patriot has really grown on me. Dripping and driving yikes. Thank you.

Haha sorry man! It's not an app its a website! www.steam-engine.org

If you have an android cell phone you can get the vapers toolbox app for free. It will give you a ton of info.