Leaderboard

Never grumpy I let Mrs BC have that emotion lol.

As I was charging 3 of mine last night I noticed something. The light on the charger would go green but the light on the battery would still be on. It would pause for a few minutes then kick back in as the different stages of charge were reached. I think when I pulled mine off the charger I happened to see it glowing green and assumed it was charged. I am not sure there is a need to unattach then reattach to keep the charge cycle going like I had first thought. Being in the same room where they are charging in plain view makes it easy to see the green light and assume the charging cycle is complete. At times I have 6 charging at the same time and it makes it even harder to remember which one was plugged in when lol.

http://www.maximumvapors.com/The-Beast_p_514.html All boxes will be built and shipped as they are finished! I can promise you that boxes are being assembled as fast as we can. Please watch our facebook page, "ModWizard" for any/all updates on this mod. Warning: If you haven't owned a mod before and are not a VERY experienced mod user, please don't buy this one. This device is only for advanced users. This box is designed for use with a dripper or Kayfun type device. Dripper recommended so that you can experience the true power. The Beast is a 200 watt badass box mod. It runs on two (2) 26650 batteries. The regulator is rated at 40 amps, so your safe build for full power is .125 ohms. There are options for the design, so please look over them at checkout. The connection is a 510 connection that uses a spacer that is built by us and is laser engraved. This mod is the first box I believe that is using this regulator with dual 26650, so this build is a first on the market. I will be changing a few things and adding a few things. Units shipped may vary slightly from that pictured (but only for the better). We are listening to your feedback and doing everything we can to make this your dream box. Options will need to be chosen during the selection process before adding to your cart. Warranty information: You will receive a letter of authenticity that will be numbered to match the serial number of your box. If you are not satisfied with the build quality you have, we offer a 7 days, no questions asked policy for return. All units come with a limited lifetime warranty on the box and everything, minus the raptor chip. The reason I don't warranty this part is you can build to low of a ohm coil and end up hurting the chip. If the raptor chip does go out it is 75.00 replacement charge. Additional warning: this box is very powerful and if your cotton/wicking material is not wet, it may catch fire. Please make sure your cotton/wicking material is sufficiently saturated is wet; only build above .125 ohms to avoid damage to your regulator; make sure and put your batteries in the correct way! Now for the specs Number of Outputs 1 Voltage - Input (Min) 5V Voltage - Input (Max) 13.8V Voltage - Output 1 0.6 ~ 5 V Voltage - Output 2 - Voltage - Output 3 - Current - Output (Max) 40A Power (Watts) - Manufacture Series 200W Voltage - Isolation - Features Remote On/Off, OCP, OTP, OVP, UVLO Mounting Type Through Hole Package / Case 15-SIP Module Size / Dimension 1.45" L x 0.42" W x 1.10" H (36.8mm x 10.7mm x 27.9mm) Operating Temperature 0°C ~ 70°C Efficiency 93.7% Power (Watts) - Max 200W

I know there are a bunch of you spinner/twist folks!

Hey guys I'm new to ecig forums love that I can actually get involved right away! Here's a couple pics of my setup. Built this coil the other day and its been incredibly to me. All 8 coils fire evenly and soooo smooth, completely not what i expected.

Bulldog-Vapor Blueberry Pie. Tastes like……. blueberry pie. SHOCKING!

VaporDab supplies a lot of stuff. You're going to have to be more specific with a model number or a picture of the problem. I wouldnt use any charger not made for your battery. But tthat's just me. I like my face how it is now.

I want to try some, but its a bit expensive for me at the moment. I got permission from the boss (my wife) to get some, i just cant commit to it yet... lol

Yep. Just like Bcarter said. They're the same single coil KPT coil you use in KPT and KPT2. The VT Store has them in different ohms.

Vapor talk store has them in 5 packs for $5.99 as do about every supplier. Not hard to find they are the universal KPT coil.

I use the single coils in my KPT3, they seem to work better for me than the dual coils did at half the price.

All at $100 shipped. And I paid the extra $5 for fast shipping. Ordered Saturday, checked tracking and it's already in Little Rock. Should be at my place tomorrow.

Got some crazy meds with a name a mile long

Week 6 weight loss 3.4 lbs Total loss 21.4 lbs in 6 weeks

Taste is so subjective. What tastes good to one person will be vile to another. To me, no matter how long I steeped their juices -- it all tasted like dirty socks. Lol. I really wanted to like their flavors because they had such great customer service. It just wasn't meant to be.

You can eliminate different equipment by taking yours in with a clean empty tank. If it is domestic liquid I would say the steeping thing has more to do with it than anything else. Especially if it is made to order.

Go buy yourself a VTC4 or 5, ASAP.

Cotton is much easier to use than silica, as silica likes to fray when inserting into a coil.

We did at one point but there wasn't much interest in it. Granted it may do better once we expand into more e liquid lines.

I assume you are checking your coils for shorts before firing?

Hi Folks, Please ensure liquid reviews are left in the e Liquid review forum and not here in e Liquid Discussion. Reviews posted in this area will be moved or deleted. We want to ensure the forum is kept as organized as possible as our sub forums grow. Thanks!

Coming in at 1.4ohms....my first coil has been built! Got an Igo-L off a friend for a few bucks so I built a coil on it and away we go. Immediately had to drill out the air hole to 5/64th but now it hits quite well for a 1.4ohm single!

Someone told me that I am not "experienced" enough to do a build with 24g Kanthal. Hmmm. this is my parallel 24 g for my hubby. .21 ohms and he loves it! My rule is if I build it I vape it first. I disagree with those who have no faith in me. I may not have a lot of experience but I do have apps and websites and the experience of others. I never ever go below a .2 build---if I do I toss it. My husband cross checks my builds on his ohm reader ( double check to be safe) and then goes to some website to check the build against both types of batteries we use. This build had him telling me "You are the BEST. BEST. WIFE. EVER."

This is the first Zenith clone i seen advertised as a 1:1. http://www.gvapers.com/products/zenith-v2-1-1-clone-preorder . Even though its a preorder i'm quite excited about this zenith v2 clone coming out. Ive purchsed a clone from a group buy a while back and it wasn't "it" so i went and bought an authentic because i loved the look of it. Since these ones came with extra sleeves id figure i'd get it to use as a backup and for the sleeves.

Thanks Josh! I'm vaping what I call Fadora Mash. It is my all day vape. It is all the spiced juice leftovers mixed together with a small amount of Camel Tobacco flavor added in. Sometimes it tastes like Snickerdoole other times like apple cider, just a rainbow of flavors. No, I do not know what the exact NIC% or PG/VG% is, but I do know for sure it is below 24 and above 6. I just can't let it go to waste.

I rotate these three by the day, Fadoras Mint medley, Fadoras Apple cider ". Watermelon I'm really hooked on Fadora Vapors