Leaderboard

(the screen was the dead give away) I am going to lock this thread now. It is evident that this is for some thing other than e liquid. The product has been identified. Glad we could help you. I hope you are able to return it. For other noobs reading this thread, VT has a strict policy of No Drug Talk. We do not support any of the electronic devices used for that purpose.

The Omnitester The Omnitester is a cool new gadget from SmokTech. This device allows you to check the resistance of any 510 or eGo-threaded atomizer. It also allows you to check the output voltage of your 510 device, including Pulse-Width Modulated devices, like the Zmax and even eGo batteries. You can also attach an atomizer and a device at the same time to test its voltage under load! The Omnitester has an internal battery, and comes with a USB to Micro-USB cable to charge it. There are a myriad of uses for a device like this. You can simply test your resistance and use it as an ohm-meter. You can also test the voltage drop of your mechanical mod by attaching a mod and an atomizer at the same time. You can even check the output voltage of a mod that's set to wattage mode and get results in real-time, instead of using an Ohm's Law calculator. If you're feeling really crafty, you can even attach a gooseneck extension or two, and use the mod while it sits on your desk, without even having to pick it up! Whether you're a veteran or a beginner, this is a handy tool that shouldn't be passed up! http://www.madvapes.com/the-omnitester.html?acc=c8ffe9a587b126f152ed3d89a146b445

LMAO No Peanut Butter Cups for you!

What Josh said! I will not be held responsible for people dripping and passing it on to their SOs.

That's awesome JerryJoe, welcome to the darker side of the dark side. Isn't it nice being able to tag team flavors and juices whenever you want? Tam got me into dripping too, and now my girlfriend's got the itch to drip. I'll soon be ordering a .357 I'm just waiting on my drip shield, I'm using RDA's at the moment but I want the 510 attys for convenience and flavor swapping. One of my first PM's exchanged was with Tameiki and she got me started dripping (ok rewrote that sentence 4 times and it still sounds naughty, I give up) So she's the one you all have to blame for me sticking around, she was just so helpful.

Hello all, I am new to the forum and have been vaping for 30 weeks and 4 days. After having smoked for over 30 years this is the first thing that has worked for me as far as stopping cigarettes. Just like us all, I guess I had quit several times but it never lasted long. I am still a nicotine junkie but this thing is awesome! I have the Kanger protank II and the Vision Spinner and am totally happy with it and the results so far. I will continue to count by weeks until I make a year, which I see no problem with at all. The fact is, I don't smoke anymore....I vape!

Don't think a hover craft could even help them wore out azz roads lol

You'd think with the "natural" cushion I have going on, I wouldn't have this problem. lol

For cleaning my coils I use regular drinking vodka and soak them overnight. For cleaning my HH.357s I only use Premium vodka...just 'cuz. By using vodka, you don't have to worry about rinsing them out as well and thoroughly as you would 91% alcohol. Let air dry over night so it's really dry and prime with juice before putting into tank or let sit for several minutes so your wicks can absorb the liquid before vaping.

He has the bouncy chair! lol

Dang. Now I've got that song running in my head... *sings* Then I'm walking in Memphis I was walking with my feet ten feet off of Beale Walking in Memphis But do I really feel the way I feel? Just got into Denver to my hotel. My butt's numb. Don't know how you do it everyday, all day, Josh.

Okay, you get a bingo too Sorry for buttin' in.

Bingo

Just me thinking out loud here, but having that mesh under the tip looks like your "clearomizer" is intended for uses other than vaping e liquids. Dang it! Too slow again!

I got another one right! lol I'm on fire......

Rubber bands or rubber gloves.

Awesome now one of the shaft and the tip assembled without the glass We'll talk dinner later.....

That looks pretty awesome. If you get it figured out I'd be interested in buying one from you!

What do you meen no dice? The whole freakin top comes off... lol

Seems odd for a rebuildable to sit flush on a table, no 510 connection?

Very nice Josh

Looks like a gray beard Nice!

Got my Kick 2 today from Richstag. Come to find out that it won't fit my Mods using 18650 batteries. So I'll be grabbing some 18500s soon.

Yeah buddy! Got my Tobeco Stillare.

I like the Iclear 16 dual but seem to get as good if not better performance from my single coil rebuild KPT.

Scrap 3/4" Pine board (cut 7" x 5"), and a $0.49 Pine "dice" from the local craft-shop. I trimmed the edge with a router, then drilled space for seven (five in front of the cube, one on either side of it) 510-base tanks, using an 8mm (or 5/16") drill bit. Centered between the five 510-tank slots are four 9/16" holes for eGo threaded tanks (my KPT3 minis and EVODs) in the front row. Things looked a little "off" in the front, so I added holes for two drip-tips, one on either side. The cube has four 9/16 holes drilled for 14mm eGo batteries. Light Oak stain and two coats of semi-gloss polyurethane... Took an hour, start to finish (not counting drying time, which it's still a bit tacky 12 hours later).

Ok. Don't ever say this again! Lmao!

Yes you should be fine, I think that's a typo above though and you meant to say 3.4 volts, and the voltage experts can comment on that. I use organic cotton balls from CVS or Walgreens, both places near me carry them, one is called "Studio Beauty" or "Studio 35 Beauty" and the other brand is "Organic Essentials". They were $3 at CVS and $3.99 at walgreens, a bag lasts a few months to a year, I am sort of wasteful with my cotton balls, I"ll pull out a chunk to make a wick and then throw away stuff i pull off that could probably make a few more wicks, or sometimes throw away the whole rest of the cotton ball. My first month or so using the organic cotton balls I didn't "wash" them. I've read arguments both ways about it being needed. I boiled a bag in distilled water this weekend, I don't want to get too off topic with that so if you want to know about it shoot me a PM. I have an innokin MVP and it rocks out a Kayfun at around 2 ohms, although the battery in the vv3 is smaller and has different power specs. Definitely get the ohm meter, not just for safety but it will help you build your coils soooooo much better. It really takes it from being a hassle to being a breeze in my opinion. I tried using a multimeter at first, it was a real pain in the butt compared to the ohm meter that cost me around $14 with shipping. Check out lightning vapes for your Kanthal A-1 wire and ohm meter. If you want to experiement with smaller quantities of wire, check Fadoravapor.com. I bought some Kanthal from popular online shops and paid about as much per foot as Compenstine sells 3 feet or 6 feet for I believe. It's been a few days since I realized how cheap it was on his site and I can't remember which it was. Sweet-Vapes.com also has the ohm meters including the smok-tek omni tester which is really nice.

i had cinnamon melt 2 iclear 16s quick. less than 2 hours of vaping

Okay... I got lost he is using a 357?? I'll go back to sleep now.".

26 ga parallel coil reading at .26 ohm. Mmmmmm, so nice but a little close to the limits of my Sony battery. Would take a pic of the coil but my phone stinks

Decided to go back to a dual 26g 8 wrap 0.41 ohm build on my Magma. Having the single nano dragon would dry up the cotton faster than it could wick up. Really throws the vapor! Pic didn't do it justice. Was having a hard time snapping the pic at just the right time.

5 DNA30 chips.

Uhh it looks more like he's referring to an atty to me

Tried out a build with the 22g that I received the other day. Running @ .59ohm and it rips for a single coil build. My IGO-W looks pathetic atop the 26650 Stingray. Lol.

That build looks awesome!!!

I can tell you what I'm NOT vaping - Just polished off the last of Fadora's exquisite mint medley...so sad On the bright side I've loaded up a tank of Time Bomb "Julius" .......ahhhhh I am such a juice wh*re....

Cloud chasing ain't cheap. The cost can be measured in fingers, hands, and faces. You wanna do it on a budget and not do your research? Hope you can afford it...

Also, before you do any shopping for building supplies, your first purchase should definitely be a dedicated ohm meter. Nothing else you buy after will be as important.

Got a package from Comp from Fadora Vapors today. Two 30 ml bottles of Home Canned Peaches at 13 mg nic and a replacement yellow battery case. The original battery case's handle came off so, despite telling Comp I didn't need him to send it, he insisted and replaced it for me. Now, that's great customer service!

Vaping some of Tam's special mix of mojito now.

Lol, melt ..

Good god son your face is on fire! :Grabs a bucket of water:

0.65ohm 26g 10 wrap single nano between the posts. Dragon wicked. It was kinda hard to wick it, but I persevered and it hits awesome! The heat is down, which helps due to the limited airflow.

"Buttery Nipple". Liking it so far...

Monkey buns Cinnamon/bakery/spices About to switch over to mocha java.....

moved on now to greenman druid's breath. I hate the name but love the juice. Its suppose to be strawberry and cream with a chocolate undertone and my wife can smell the fruit. I cant and can only taste the chocolate. Its like a malted milk chocolate but sweet. It was instantly a favorite. I vaped the 15ml bottle dry the day I got it and have to keep 50 or 60 ml around to be happy with the amount. I am down to 50ml so just a few days ago ordered 60ml more. I like it that much.