Leaderboard

Nope. Somehow it loses something without the cool lights and sound effects.

In the past week, I've placed orders from: Johnson Creek - 5 - 5mL juice sampler in a free tin Mount Baker Vapor - 3 - 15mL juices ECigsPlus - 2 Vision CE4 clearomizers, 2 Vision CE2 Nano clearomizers, 5 pk. replacement coil heads, 1 drip tip, 2 juices ValueVapor - 1 DSE-901 LR atomizer, 3 drip tips, 2 drip shields, 2 adaptors, an eGo thread cover and an eGo Mini kit that I still swear just jumped into the cart, out of my control! And I complain that my "$$ saved" is so much less than I'm spent so far...

VariTube has these in a kit for $89.95 shipped, or just the APV body for $79.95 shipped, and it is Kanger Clearomizer compatible (eGo threaded). The kit includes: - 1 Zmax Telescope Body - 1 18350, & 1 18650 for optimum set up - 1 charger - 1 Zipper Case - 1 1.6ml 2.8ohm Clearo

just wanted to share my collection of my favorite mods i finally took some pics of, ill be posting more pics and videos later. both provaris i treated with a bench buffer w/ some medium brown compound, the mini i went w/ a duller shine to try and match the titanium of the cobra the cobra RBA I bored out the breather hole a little for more intake higher res: http://www.flickr.com/photos/ac1djazz/sets/72157633075543896/ -kevin

I got my reply yesterday and the new cap is on it's way for Monday or Tuesady. Here was his reply on the spring and if there were any wires: The spring in the mod is not a "hot spring". But we do know that if the mod does get hot enough, the spring will collapse (completely flatten out). If you wanted a hot spring, I believe that AltSmoke sells them but they are a little small in diameter for the Stinger. It will slide in and out of the mod easily when you remove your battery. Also, there is no wiring in the mod. The button is directly soldered to the positive inside the cap and the negative comes from the spring in the bottom of the mod. It sounds like mcquinn (thank you, sir) knows some things about IMR's that I did not. He is correct that the 26650 does have a large flat top positive contact. Hopefully, having the kick instead of the rubber/brass spacer plug saves the new button. I tested the 26650 in the tube and the positive post does not touch anything when i attach the kick housing, it will only be touching the kick. Any other last minute precautions I should be aware of before the cap arrives?? And yes, Uma, I will be charging the battery before using again thanks to you!! I got a lot of goot info in this thread so thanks for all the help.

Let me know what you think! I hope you love them as much as I do... I just ordered several more, you can never have too many backups!!

That's the great thing.. it doesn't matter. If you put it in VW mode you find the wattage that's good for you and that's it. Any resistance topper you put in will vape at the same (roughly) voltage output. I keep mine around 8W.

Bakery flavors are a nice change of pace. Pineapple upside-down cake from Sweet-Vapes is very tasty. Other good flavors are Apple Pie, Cinnamon Danish, Bavarian Cream, and a whole lot of Coffee variations just to name a few. Also, you have to keep trying different tobacco flavors from different suppliers and you might find a few more that you really like and you know you can always go back to turkish or ry4 later. A flavor might seem different to you after a long time without it and it fun to go back to one from before. I don't know about you but I can't live with just one flavor. I usually have 2 or 3 e-cigs with me at all times not only for backup but for a flavor choice. I do vape the tobacco flavors the most but I couldn't go without some of the exotic ones. Don't hesitate to try anything, you just might like it.

Those are some really beautiful mods.

Personally, I believe "dry-burning" is mostly used when employing RBA SS mesh wick setups. As Tam pointed out, dry-burning a clearo is risking a burnt flavor. When I clean my clearomizer, I do the following method religiously: 1) remove, rinse, and dry the drip tip. 2) remove, rinse, and dry the tank. 3) remove the head. Remove the silicone piece. Rinse, and pat-dry the whole assembly with a paper towel. 4) rinse and dry the base. 5) re-assemble the base with the head minus the silicone piece. 6) attach the base + head to the battery / mod, and pulse-fire a few times until the internal coil and wick is dry....this takes some practice, but you'll figure it out soon enough. 7) re-assemble the clearomizer unit, and fill with your favorite liquid. 8) wait five minutes, and enjoy a vape!!! Normally, I use a paper towel, along with blowing air thorough the hollow parts to dry everything on the unit. Once you find your groove, then these steps can be accomplished in 5 minutes or less. Hope this helps!!!

hey everyone i think i just got a killer deal check out the link http://zainy.net/home/200--latest-provari-vv-mod-vamo-.html i know nothing about vv/vw. i read somewhere that before i start setting the mod to various settings i need to learn more about vv/vw products. can anyone tell me a link that i can learn from or just tell me what i need to know?

The first two go--go batteries I bought finally bit the dust after only two and half years (that is an estimated time but I think it is pretty accurate). I will be ordering two more the first of the month. While I have many mods, this is the one that I enjoy the most!

They really did a good job and I have an adapter to put on the vamo and Lava Tube so that I can use the go-go carts, so I am good to go..

To prevent coil burnout, "safe" vaping occurs between 4.5 and 8 watts. If you want to know where to set your voltage, just find the square root of the product of the wattage you desire times the carto/atty/tank's resistance. For example, if you want to vape at 8 watts, and have a 2Ω cartomizer, just multiply 8 by 2, and you get 16. The square root of 16 is 4. You need to set your variable voltage device at 4 volts to achieve 8 watts. Using your 2.4Ω heads, 8 watts will occur at 4.4v on your PV (2.4 x 8 = 19.2...the square root of 19.2 is slightly less than 4.4...4.38 actually). It sounds like a lot of math, but it gets easy once you've done it a couple of times. If math isn't your strong suit, by all means, use a calculator, or just click here.

Oops. No. Sorry! I got this thread confused with the direct dripping one. These are direct dripping atomizers. Brian has the 1.8 ohm Vivi Nova coil here: http://www.theveteranvaper.com/vision-vivi-nova-long-wick-replacement-coil/ The Veteran Vaper store is excellent and the customer service is even better! Sorry about the mix up but are you sure you don't want to try direct dripping? You can actually change flavors easier this way.

So i took Tameiki's advise and ordered some 2 ea. BOGE 510LR +-2.0 OHM ATOMIZER 2 ea. BOGE 510 +-3.0 OHM ATOMIZER (black) gonna give this a try i have a drip sleeve and a drip tip coming so i guess my next question is will i need one for each new flavor i know with mu cartos and clearos that if you use two different flavors it seems you cant get rid of them lol

TVR- 6ml Apple Pie 0mg 50/50 6ml Pink Cotton Candy 0mg 50/50 15ml Weekender - Horchata 12mg 50/50 15ml RY4 12mg 50/50 30Ml Flavor of the week 555 12mg 50/50 Avejuice Boba's Bounty 30ml 12mg Gorilla Juice 12ml 12mg Including my Mt Baker and Madvapes order that is in the mail i got 354ml of various juices heading my way! Vaping coma here i come!

I have been smoking cigs for a long time. I want to quit and am looking for something thats really strong. I have been smoking newports a pack and a half a day. I was trying to get some good recommendations so I can finally quit. I tried a blu quit for three day but battery life sucked and jus wasnt strong enough any suggestions

If you wanna try some good drip atties that won't break the bank, VapeLite.info has Boge 510 atomizers in standard and low resistance for $3.50...that is if Tameiki hasn't bought up all their stock in one whack again. Shipping on small orders is currently $3

Note that some drip shields are ego threaded so pick which device you will be using unless you don't mind seeing the threads (or using a thread sleeve) on yer ego.