Leaderboard

Customer review from MyVaporStore.com's EVOD product page: Reviewer: EddieAdams from Huntington, NY United States "I really loved the t3 when it worked but, the flooding/leaking issues I experienced on all 3 that I ordered made them something I stopped using outside of home. I decided to try the EVOD seeing it was a redesign in hope that the flooding issues were resolved. I'm on my second tank without issue! I love the volumes of smooth vapor and the higher voltage performance of an clearomizer. The smaller capacity/size is a big plus for me. 2 ml is plenty. Actually looks "right" on the 650 mAh battery. The new mouthpiece is slimmer and flared which is more pleasant to use. The flaring gets rid of that stream or small hose feeling when pulling that you got from the t3.The tank is transparent by the mouthpiece allowing for easy viewing of remaining liquid even if not visible through the sight windows by flipping over. Replaceable heads are priced right. As long as I continue not to experience the issues I had with the t3,Kanger and MVS have a real winner in the EVOD."

I just got the Joyetech ego-c starter kit, since I needed most everything replaced anyways lol. My mamma had given me an ego-t ecig (a one unit atomizer, clearomizer, battery, two cartridges, and a drip tip.) I get excited over silly things like color, so I was happy I could get a pink tinted clearomizer with a pink battery, lol. It came with Menthol, and I like that because it's what I used to smoke, and I order a bottle of chocolate flavored eliquid that I didn't like at first but it grew on me quickly. I don't think I'll order it again, but I will definitely use up the bottle. This is my first time with 0mg nic level, so ... fingers crossed! I haven't had a craving all day. The menthol I got with nic in it just in case. I don't wanna shoot myself in the foot so to speak and end up with analogs again because I don't have any nicotine!

That mod looks seriously bada$$ love the bullet-head drip tip there

Any drill bit will work. It just takes time and a gentle touch. I used an old generic bit that worked like a champ. Just put a very minimal amount of pressure and run the drill slower. It'll cut through it I promise.

I doubt that there is much Q.C. on the components .The nichrome wire is likely the culprit.I would imagine they just measure off a predetermined length for each coil irregardless of the resistance per foot of the batch.They still work better than anything else I have found.

Yes, the vapor produced is incredible. I'm very happy with it.

No leaking problems with mine. It's been working flawlessly.

*UPDATE* Just out of curiosity, I checked to see if the atty head was screwed down tight. It was a full turn or so loose, so I snugged it down, and now I'll see if that takes care of the connection leak.

Yes it's at a 45° angle, barely off the bottom, using a Vamo. LOL I hope I covered it. :-)

Mine leaks like a sieve into the connection area when it gets below ½ full. But from full to ½, it's hands down the best clearo I've ever used. Go figure.

I have a black 400mah spinner and love it. I didn't bring my Provari with me to training in Va. but this thing has been a great device for me. Easy to pocket and if it breaks or i lose it it's only a $20 batt. 3.8v with a 2.4ohm (or so) vision nano is just about a perfect setup on the go.

so i have a cool lil update .. today someone showed me to take one of the wicks out,, it helps with the flavor issue that was my biggest problem .. so what ya do is ya take the bottom out like ur gonna re-fill the tank.... and on thecenter post theres a rubber seal ... pop that off... then... you wiggle that lil center post till it pops off.,, you take the wick that sets on top of the coil off and put it back togeather... wa-la,, problem fixed.. lots more flavor lots more vapor!!! win win... love this thing!!!

so ive had mine for a few days now.. and heres what i think,, i love the look and the design is great,, no leaks and its durable as my devices keep falling over and it hasent broke or leaked,, it looks sexy as hell on my tessla, and it has the ego threads so it tops my tessla really nice!! now on to functions.. the kanger at first i got a few dry hits and that was after filling ,shaking and letting it sit,, i actually had to pull really hard a few times with out fireing the device to get the wicks to start up.. but after that first wicking,, i havent had any wick issues.. and have gone thru a few tanks of one flavor,, and then i swiched,, the flavor in the tank swiched right away... i really did not expect it to swich over so fast. so thats def a plus, it vapes really well and i like it,, i am considering buying a few more.. differewnt colors to match the mod and the color of the batt in my tessla as you can see the batt. overall i like it alot... do i love it ???.... yeah i could see my self loving this after awhile.. i wanna try a few stronger juices in it and see if i can boost flavor output,, but aleal wise i love the look.... one downside is you can not connect another tip to it as its all one peice.. but something i can live with ... i give this a thumbs up ,,, def woth a try.

I thought it was one the first time that I looked at one, but there seems to be a couple of (improved, I think) design changes. Unlike the T3/MT3, when you have to change out heads, you just unscrew the head from the base and screw in a new one ($1.50)...cheaper to replace than the T3/MT3's head and base one-piece assembly ($2.99). Also, the transparent mouthpiece is supposed to be more comfortable than the T3/MT3. At only 2 ml., the EVOD's capacity is almost ½ ml. less than the T3/MT3, but it still holds almost ½ ml. more than the competition's 1.6 ml. (i.e. eGo V# Clearomizers). I've got one on the way and I'll post the results once I've had a chance to try to destroy it.

I just pulled the trigger on one.

Same here...I ordered one yesterday to try out. I'll post my impressions.

I got mine from hotvapes but i know other sites sell 'em too. It's the same as the 510 to Ego adapters... works great for me. Edit: Hotvapes calls it the 510 to 510 Mega Connector

i have one of these on the way,, im quite intrested on how it works and performs, im not up to date on alot of the products so i will try to report back in the next few days with my opinions on the thing

Again, I ask why all the ego threading? Why can't kanger make a bottom coil 510?? If you stick a 510-ego adapter on a mt3 it's freaking half as tall as my mod... annoying.

Okay, they really need to stop coming up with so many cool toys now! This one as well as a couple of others I saw from today's Vapelite newsletter all seem to have the easy to replace outer wicks. It was a real trial for me not to click "add to cart" today.