Leaderboard

Here's one of my happy places. Especially when the kids are fishin' and I brought the Kindle along.

"May" try it out?? More like "should" try it out....heavy emphasis on the "should." BTW, mse12....I couldn't resist, and broke into the Ginger's RY4. So far, I'm really liking it. Dulcis is next on my list.

I think there are 240 cigs in a 10ml bottle of 24mg..... Give or take 100

JC, you could try these options they are simple to use and vapors new and old love them. Battery: Vision Spinner 1300mah (long battery life and variable voltage) Tank: Vivi Nova (easy to fill and a good vape)

Early birthday present. (I'll try to act really surprised when it arrives. )

From myvaporstore.com: AGA-T Plus - $25.78 shipped

I'm finally gonna get to see how my Zmax responds to stacked 18350s! From VaporKings: Christopher...I apologize for having to use that coupon code. Think you can you get them to give us one?

Either in my reptile room, or the basement rehearsal studio.

Ahhhh.. Bobas Bounty.. The stuff of legends.. supposedly. I ordered it in 50/50 @ 18mg and 24mg. My initial reactions was that I hated it. I loaded up my Vivi Nova and a CE4 clearomizer to give it a fair shot. I vaped it for two days on my Riva with the CE4 @ 2.0 ohms while at work and on my Vamo with the Vivi Nova @ varying wattage's to try and find the sweet spot. After two days I still hated it... no throat hit from either strength, weak flavor but there was a lot of vapor production. I was perplexed.. I used it on and off for about a week and still hated it. I used it exclusively on NYE and was utterly bored with it. Then... last night I decided to try it again. I took out a 2.0 ohm atty, cleaned it put it on the Vamo @ 7W and loaded up a few drops. I took in a long hit and immediately knew what all the hype was about. The complex flavors came through the throat hit was smooth and strong @ 18mg and the vapor production was awesome. So here are my final thoughts...on a scale of 1-5 worst to best... Throat Hit- Smooth but definitely there, good and strong with out the scratchiness even at up to 8W --- 5 Vapor Production- Even @ 50/50 it's awesome. Clouds of thick vapor that tend to linger a bit--- 5 Flavor- It's hard to describe to say the least. Mildly sweet tobacco flavor with undertones of creamy chocolate and a VERY light nuttiness. I mean VERY light, it comes through on the exhale in a subtle way. I know I said 1-5 but I have to give flavor a 7.5 Now my next goal is to find a tank that this will be just as awesome on.

Budget? Whats a budget?

So, like, I went to IKV and they were sold out in my mg and size.... so I bought an SS Vamo at VaporBank lol. I'm only 40 bucks over my budget for this payday, no problem right. Hopefully next payday IKV will have some more in stock. Wish me luck! me and my silly distractions! why oh why can't I ever stay focused?! and on budget! Hubby's gonna disown me if I keep this up.

thanks guys

Yes, it's on my "to buy" list. Just have to wait for my next check to come through in a week..because all the shops pretty much charge shipping, I have to have a big enough order together to make it worthwhile.

I have not. I'm letting time test it before I buy anything. The hard ceramic is supposed to be ultra brittle but that's just what I've heard. I will be picking up some XC-116 braided ceramic wick (think of silica style) tomorrow. I've seen users report awesome performance with that. I know that some of the ppl over at (insert huge forum name here) were using the ceramic filters that go inside fish aquariums for wicking materials. Really? You want to cut up something that goes in a fish tank and vape it? Not this guy. I mean I have no doubt vaping is not healthy but that just seems a little crazy for me. I am happy at this point with SS mesh so I don't feel the need to jump into the new styles quite yet. There's a lot of rba users calling these "fantasy" wicks. I will wait it out for now and see what really proves itself and stays around. If you do try it you have to let us know the results! I'm obviously interested in ceramic but not ready to dive in yet.

I have heard that the lemon flavored liquids will do crazy things to tanks. Maybe it's eating the paint off your end caps?? And, yes... cartos are disposable for a reason.

I'm sure to be in the minority here... but I honestly don't like the Silver Bullet button. It's hard on my big ol fingers... both SB's I've had I've ended up having to push that button really hard to fire it. That's not too pleasant really. I just prefer 'clicky' buttons.

They are huge but it still kind of irks me. I can run a 4000mah battery with the kick for roughly 24ish give or take hours before it starts to stutter. That's a MAJOR deal compared to 6-8 hours on an 18650. I just wish they would work similar to the vv/vw mods that'll run an 18650 all day long. I could run my lavatube or vamo probably 24ish hours on a single 18650. I guess it is really just a give and take for what style of mod you want to run. I'm honestly happy I guess I have the "gotta have more" syndrome. lol

Are you wanting to clean them to be able to switch flavors or are you just cleaning to clean? I'm just wondering. I've not run into many who want to clean cartos. For me it is easiest just to open a carto, run one juice in it until the performance drops and just trash it. I'm not bashing by any means I'm just confused why you're trying to clean them. Cartos never have a long life span to begin with. After about 30ish mls the flavor really diminishes to the point that I just want a fresh one. I'd have a hard time thinking any type of cleaning would really help the polyfil out after that. I could be wrong but I'd hate to see you buy something like that and be disappointed.

You may try it out, it has turned into many all day vapes for a lot of us.

If i only had a sensory deprivation tank...

But some of them smell soo good!

Would you happen to know the I.D., O.D., & thickness of the washers?

36mg will definitely have a stronger kick than 18mg. The taste will be different with 36mg also. Probably more peppery tasting.

I don't think it is frayed o rings. I just got this tank but a few weeks ago a month maximum. My other one is even older and it has never done this. It is just that the paint or metal has broken down around the top and bottom on the inside. I believe that is from letting it sit in water for who knows how long when I had no e liquid and forgot to take it out to dry. I really think that the juice somehow has pulp or something in it or is just acting like it. I know for sure it can't have pulp in it as there is just flavors in ejuices and not the actual lemonade. But as the cleaning kit goes I am just not sure which I should get. The one I posted or this one: http://www.myfreedomsmokes.com/categories/the-plunger.html this one is about $10 more. But it has an attachment to screw into instead of just having a tube that goes around the cartomizer.

I have no idea about amount vs analogs but I know I go through 20-40 mls a week seems like. It varies quite a bit depending on my schedule and everything. I would expect a 10ml bottle to last a couple days if it were my all day vape. Sorry I'm not more help than that.

From SureVapes: Boge Mix'n'Match Cartomizers (5 Boxes) Box 1: SR Stainless 3.0 Box 2: SR Stainless 3.0 Box 3: SR Stainless 3.0 Box 4: SR Stainless 3.0 Box 5: SR Stainless 3.0 $23.00 x 1 $23.00 + FREE SHIPPING

No worries Uma. I'm sure the bam is awesome. I know my stinger is great. I really wish the kick didn't drain it so much. that's the only issue. I knew it would be that way though. I wish the makers of the kick would do something about that. Maybe if they introduce a new kick it'll be easier on the battery life.

Good news MSE! Pixlejuice gave me permission to post his/her washer pic here. He/she is looking for the info for the right size o-ring he used on his "S" model. He/she said it came off another RBA that wasn't in use at the moment. Notice how the washers now act as an extender of the center positive post. It's almost like we've moved the center post closer to the wick, like a good little atty should be. The wire is now just a tad bit showing in between the mesh and the new positive post current.

I take it you straighten the wire with your fingers after it stops glowing?

The Comfort Tips are here...and they're AWESOME!!!

Somehow, that just sounds...wrong. lol