Spent all nite testing this out. I am crossing my fingers that this will help those that are struggling. This example uses 510 fittings but would probably work for other models as well just adjust your supplies according to your model.
What you will need -other than your e-cig (PV) of course:
working 510 standard resistance atty (not tested on LR'S)
* drip tip
* blue foam filler - your only going to need a tiny square of this - you want it cut to about the size of the opening on your atty (or M&M candy) only square- no need to make it round
* your juice of choice
* pair of tweezers
Directions:
* attach the atty to your PV
* using the tweezers gently place the square of blue foam directly down on to the bridge(the peice that sticks up) of the atty.
* squeeze 3-4 drops of liquid onto the blue foam
* pop on your drip tip - and vape
TIPS:
1. be gentle on the first draw or two- this way you can avoid taking any liquid into your mouth if you put a little too much on the filler, likewise if it was not enough you can avoid a huge harsh hit if the atty is too dry.
2. to re fill simply place 2-3 thru your drip tip which will work down to the blue foam whenever you start to loose flavor
Notes: Awesome flavor and vapor production, hits much more consistently than DD without the foam, better flavor then using carts, chance of flooding the atty greatly reduced.
The foam does not burn or stick to the atty after doing this method all night.
Flavor changes are simple - use the tweezers to take out the foam -squeeze with a napkin, tissue , or paper towel, replace and do the same process with your new flavor.
***** I sincerly hope this helps someone - if the method your using now is working well no reason to try this, but if your struggling please give it a try and let me know if it worked for you.